EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Mechanical Properties of a New TWIP Steel under Different Heat Treatments

Jiaruiming Zhang iD, Yu Bai, Wenxue Fan, Guanghe Zhang, Wenhui Zhang, Yang Yang, Hai Hao

Materials · 28.04.2024 · 17 (9) · 2080

DOI: 10.3390/ma17092080 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.04.2024. Verfasst von Jiaruiming Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Solidification Control and Digital Preparation Technology (Liaoning Province), School of Materials Science and Engineering, Dalian …. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Major Projects of Science and Technology Innovation 2025 Ningbo, Dalian University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effects of solution treatment and annealing temperature on the microstructure and mechanical properties of a new TWIP steel that was alloyed from aluminum (Al), silicon (Si), vanadium (V), and molybdenum (Mo) elements were investigated by a variety of techniques such as microstructural characterization and room tensile testing. The austenite grain size grew slowly with the increase in annealing temperature. The relatively weak effect of the solution treatment and annealing temperature on the austenite grain size was attributed to the precipitation of MC and M2C, which hindered the growth of the austenite grain. The plasticity of the TWIP steel in cold rolling and annealing after solution treatment was obviously higher than that in cold rolling and annealing without solution treatment. This was because the large-size precipitates redissolved in the matrix after solution treatment, which were not retained in the subsequently annealed structure. Through cold rolling and annealing at 800 °C after solution treatment, the prepared steel exhibited excellent strength and plasticity simultaneously, with a yield strength of 877 MPa, a tensile strength of 1457 MPa, and an elongation of 46.1%. The strength improvement of the designed TWIP steel was mainly attributed to the grain refinement and precipitation strengthening.

Schlagwörter

Stichwörter der Autor:innen

alloyinggrain sizeheat treatmentmechanical propertiesnano-precipitation

Autor:innen und Institutionen

  • Key Laboratory of Solidification Control and Digital Preparation Technology (Liaoning Province), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China.
  • Ningbo Research Institute of Dalian University of Technology, Ningbo 315016, China.
  • Zhejiang Ruitai Suspension System Technology Co., Ltd., Ningbo 315500, China.
  • Ningbo Branch of China Academy of Ordnance Science, Ningbo 315103, China.

ORCID-Profile: Jiaruiming Zhang

Förderung

  • National Natural Science Foundation of China
  • Major Projects of Science and Technology Innovation 2025 Ningbo
  • Dalian University of Technology

Zitieren

APA

Zhang, J., Bai, Y., Fan, W., Zhang, G., Zhang, W., Yang, Y., & Hao, H. (2024). Microstructure and Mechanical Properties of a New TWIP Steel under Different Heat Treatments. Materials, 17(9), 2080. https://doi.org/10.3390/ma17092080

Vancouver

Zhang J, Bai Y, Fan W, Zhang G, Zhang W, Yang Y, et al. Microstructure and Mechanical Properties of a New TWIP Steel under Different Heat Treatments. Materials. 2024;17(9):2080. doi:10.3390/ma17092080

BibTeX
@article{Zhang2024,
  author = {Zhang, Jiaruiming and Bai, Yu and Fan, Wenxue and Zhang, Guanghe and Zhang, Wenhui and Yang, Yang and Hao, Hai},
  title = {Microstructure and Mechanical Properties of a New TWIP Steel under Different Heat Treatments},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {9},
  pages = {2080},
  doi = {10.3390/ma17092080}
}
Kostenlos starten →