EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Hydrogen-Induced Induced Cracking Sensitivity of X80 Pipeline Steel under Different Heat Treatments

Chen Wu, Chunyan Yan, Shenglin Zhang, Lingchuan Zhou, Mengdie Shen, Zhanpeng Tian

Materials · 23.04.2024 · 17 (9) · 1953

DOI: 10.3390/ma17091953 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.04.2024. Verfasst von Chen Wu und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Hohai University, Changzhou 213022, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

X80 pipeline steel has played a vital role in oil and gas transportation in recent years. However, hydrogen-related issues frequently lead to pipeline failures during service, resulting in significant losses of properties and lives. Three heat treatment processes (furnace cooling (FC), air cooling (AC), and water cooling (WC)) were carried out to investigate the effect of different microstructures on hydrogen-induced cracking (HIC) susceptibility of X80 pipeline steel. The WC sample demonstrated the highest hydrogen embrittlement index, registering at 21.9%, while the AC and FC samples exhibited progressively lower values of 15.45% and 10.98%, respectively. Under equivalent hydrogen charging durations, crack dimensions with a maximum length exceeding 30 μm in the WC sample generally exceed those in the FC sample and AC sample. The variation is attributed to the difference in microstructures of the samples, predominantly lath bainite (LB) in water-cooled samples, granular bainite (GB) in air-cooled samples, and ferrite/pearlite (F/P) in FC samples. The research results demonstrate that the sensitivity of lath bainite (LB) to HIC is significantly higher than that of pearlite, ferrite, and granular bainite (GB). The presence of a large amount of martensite/austenite (M/A) constituents within bainite results in a multitude of hydrogen trap sites. HIC cracks in bainite generally propagate along the profiles of M/A constituents, showing both intergranular and transgranular cracking modes.

Schlagwörter

Stichwörter der Autor:innen

X80 pipeline steelheat treatmenthydrogen microprint technologyhydrogen permeationhydrogen-induced crackingslow strain rate tensile

Autor:innen und Institutionen

  • College of Materials Science and Engineering, Hohai University, Changzhou 213022, China.

Zitieren

APA

Wu, C., Yan, C., Zhang, S., Zhou, L., Shen, M., & Tian, Z. (2024). Research on Hydrogen-Induced Induced Cracking Sensitivity of X80 Pipeline Steel under Different Heat Treatments. Materials, 17(9), 1953. https://doi.org/10.3390/ma17091953

Vancouver

Wu C, Yan C, Zhang S, Zhou L, Shen M, Tian Z. Research on Hydrogen-Induced Induced Cracking Sensitivity of X80 Pipeline Steel under Different Heat Treatments. Materials. 2024;17(9):1953. doi:10.3390/ma17091953

BibTeX
@article{Wu2024,
  author = {Wu, Chen and Yan, Chunyan and Zhang, Shenglin and Zhou, Lingchuan and Shen, Mengdie and Tian, Zhanpeng},
  title = {Research on Hydrogen-Induced Induced Cracking Sensitivity of X80 Pipeline Steel under Different Heat Treatments},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {9},
  pages = {1953},
  doi = {10.3390/ma17091953}
}
Kostenlos starten →