Stability and Failure of Thin-Walled Composite Plate Elements with Asymmetric Configurations
Materials · 23.04.2024 · 17 (9) · 1943
DOI: 10.3390/ma17091943 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 23.04.2024. Verfasst von Katarzyna Falkowicz. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 38, 20-618 Lublin, Poland. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 81 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Center, National Science Centre.
Abstract (Originalsprache)
In the present study, the stability and failure phenomena of thin-walled constructions subjected to axial compression, featuring a central cut-out, and constructed from composite materials were explored. These constructions were fabricated from a carbon–epoxy composite using the autoclave method. The research encompassed experimental assessments on actual specimens alongside numerical analyses employing the finite element approach within the ABAQUS® software. The investigation spanned the entire load spectrum up to the point of structural failure, incorporating both practical trials and simulation analysis. During the practical assessments, the study monitored the post-buckling response and captured acoustic emissions to thoroughly evaluate the composite’s failure mechanisms. Additionally, the ARAMIS system’s non-invasive three-dimensional scanning was employed to assess deformations. Theoretical simulations utilized a step-by-step failure analysis, initiating with failure onset as per Hashin’s theory and proceeding to failure progression based on an energy criterion. The simulation outcomes, particularly concerning the critical and post-critical phases, were juxtaposed with empirical data to identify the composite’s vulnerability zones. The comparison underscored a significant concordance between the simulation predictions and the empirical findings.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 38, 20-618 Lublin, Poland.
ORCID-Profile: Katarzyna Falkowicz
Förderung
- National Science Center
- National Science Centre
Zitieren
APA
Falkowicz, K. (2024). Stability and Failure of Thin-Walled Composite Plate Elements with Asymmetric Configurations. Materials, 17(9), 1943. https://doi.org/10.3390/ma17091943
Vancouver
Falkowicz K. Stability and Failure of Thin-Walled Composite Plate Elements with Asymmetric Configurations. Materials. 2024;17(9):1943. doi:10.3390/ma17091943
BibTeX
@article{Falkowicz2024,
author = {Falkowicz, Katarzyna},
title = {Stability and Failure of Thin-Walled Composite Plate Elements with Asymmetric Configurations},
journal = {Materials},
year = {2024},
volume = {17},
number = {9},
pages = {1943},
doi = {10.3390/ma17091943}
}
EUVIMED