EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation of a (Ca,Sr,Ba)ZrO3 Crucible by Slip Casting for the Vacuum Induction Melting of NiTi Alloy

Shijia Ding, Mingliang Li, Hailong Wang, Jinpeng Zhu, Gang Shao, Hongliang Xu, Hongxia Lu, Rui Zhang

Materials · 22.04.2024 · 17 (8) · 1924

DOI: 10.3390/ma17081924 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.04.2024. Verfasst von Shijia Ding und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Henan Province University Science and Technology Innovation Team Support Program, Henan Science and Technology Research Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Vacuum induction melting is a more energy-efficient process for the preparation of a titanium alloy with good homogeneity and low cost. But the crucial problem for this technology is in developing a crucible refractory with high stability. In the present work, a novel (Ca,Sr,Ba)ZrO3 crucible was prepared by slip casting and its performance in melting NiTi alloy was studied. The results showed that a single solid solution was formed with a homogeneous distribution of metal elements after sintering at 1500 °C. It was found that the total content of oxygen and nitrogen remaining in the TiNi alloy after melting in the (Ca,Sr,Ba)ZrO3 crucible was 0.0173 wt.%, which fulfills the ASTM standard on biomedical TiNi alloys. The good resistance of the (Ca,Sr,Ba)ZrO3 crucible to molten NiTi has a relationship with the sluggish diffusion effect of high-entropy ceramics. This study provides insights into the process of designing highly suitable crucible material for melting a NiTi alloy.

Schlagwörter

Stichwörter der Autor:innen

(Ca,Sr,Ba)ZrO3NiTi alloycorrosion resistanceslip casting

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China.
  • Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou 450001, China.

Förderung

  • National Natural Science Foundation of China
  • Henan Province University Science and Technology Innovation Team Support Program
  • Henan Science and Technology Research Project

Zitieren

APA

Ding, S., Li, M., Wang, H., Zhu, J., Shao, G., Xu, H., Lu, H., & Zhang, R. (2024). Preparation of a (Ca,Sr,Ba)ZrO3 Crucible by Slip Casting for the Vacuum Induction Melting of NiTi Alloy. Materials, 17(8), 1924. https://doi.org/10.3390/ma17081924

Vancouver

Ding S, Li M, Wang H, Zhu J, Shao G, Xu H, et al. Preparation of a (Ca,Sr,Ba)ZrO3 Crucible by Slip Casting for the Vacuum Induction Melting of NiTi Alloy. Materials. 2024;17(8):1924. doi:10.3390/ma17081924

BibTeX
@article{Ding2024,
  author = {Ding, Shijia and Li, Mingliang and Wang, Hailong and Zhu, Jinpeng and Shao, Gang and Xu, Hongliang and Lu, Hongxia and Zhang, Rui},
  title = {Preparation of a (Ca,Sr,Ba)ZrO3 Crucible by Slip Casting for the Vacuum Induction Melting of NiTi Alloy},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {8},
  pages = {1924},
  doi = {10.3390/ma17081924}
}
Kostenlos starten →