EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving Laser Powder Bed Fusion Printability of Tungsten Powders Using Simulation-Driven Process Optimization Algorithms

Aurore Leclercq, Vladimir Brailovski iD

Materials · 18.04.2024 · 17 (8) · 1865

DOI: 10.3390/ma17081865 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.04.2024. Verfasst von Aurore Leclercq und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, École de Technologie Supérieure, Montreal, QC H3C 1K3, Canada. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council, Pôle de recherche et d'innovation en matériaux avancés, Québec, PRIMA Québec.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study applies numerical and experimental techniques to investigate the effect of process parameters on the density, structure and mechanical properties of pure tungsten specimens fabricated by laser powder bed fusion. A numerical model based on the simplified analysis of a thermal field generated in the powder bed by a moving laser source was used to calculate the melt pool dimensions, predict the density of printed parts and build a cost-effective plan of experiments. Specimens printed using a laser power of 188 W, a scanning speed of 188 mm/s, a hatching space of 80 µm and a layer thickness of 30 µm showed a maximum printed density of 93.2%, an ultimate compression strength of 867 MPa and a maximum strain to failure of ~7.0%, which are in keeping with the standard requirements for tungsten parts obtained using conventional powder metallurgy techniques. Using the optimized printing parameters, selected geometric artifacts were manufactured to characterize the printability limits. A complementary numerical study suggested that decreasing the layer thickness, increasing the laser power, applying hot isostatic pressing and alloying with rhenium are the most promising directions to further improve the physical and mechanical properties of printed tungsten parts.

Schlagwörter

Stichwörter der Autor:innen

crack-free specimensgeometric analysislaser powder bed fusionmechanical testingmodelingnumerical predictionstungsten

Autor:innen und Institutionen

  • Department of Mechanical Engineering, École de Technologie Supérieure, Montreal, QC H3C 1K3, Canada.

ORCID-Profile: Vladimir Brailovski

Förderung

  • Natural Sciences and Engineering Research Council
  • Pôle de recherche et d'innovation en matériaux avancés, Québec
  • PRIMA Québec
  • NSERC (Natural Sciences and Engineering Research Council of Canada)
  • PyroGenesis Canada Inc.

Zitieren

APA

Leclercq, A., & Brailovski, V. (2024). Improving Laser Powder Bed Fusion Printability of Tungsten Powders Using Simulation-Driven Process Optimization Algorithms. Materials, 17(8), 1865. https://doi.org/10.3390/ma17081865

Vancouver

Leclercq A, Brailovski V. Improving Laser Powder Bed Fusion Printability of Tungsten Powders Using Simulation-Driven Process Optimization Algorithms. Materials. 2024;17(8):1865. doi:10.3390/ma17081865

BibTeX
@article{Leclercq2024,
  author = {Leclercq, Aurore and Brailovski, Vladimir},
  title = {Improving Laser Powder Bed Fusion Printability of Tungsten Powders Using Simulation-Driven Process Optimization Algorithms},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {8},
  pages = {1865},
  doi = {10.3390/ma17081865}
}
Kostenlos starten →