Strength and Durability Characterization of Structural Concrete Made of Recycled Plastic
Materials · 17.04.2024 · 17 (8) · 1841
DOI: 10.3390/ma17081841 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 17.04.2024. Verfasst von Jonathan Oti und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Computing, Engineering and Science, University of South Wales, Pontypridd CF37 1DL, UK. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Taith funding.
Abstract (Originalsprache)
This study investigates the feasibility of utilizing recycled plastic waste as a partial substitute for sand in concrete production. Reprocessing used plastic items or materials involves collecting, cleaning, shredding, and melting, resulting in reprocessed plastic particles. Incorporating these recycled plastic particles into concrete addresses environmental concerns related to plastic disposal and the growing scarcity and increasing cost of natural sand. To evaluate the sand replacement capacity of recycled plastic, four types of mixtures were created with varying levels of recycled plastic replacement (5%, 10%, 15%, and 20%). All mixtures maintained a water-to-binding ratio of 0.55 and were tested at 7, 28, and 56 days. The testing regimen encompassed determining the slump value, density, compressive strength, tensile strength, and resistance to freezing and thawing. The findings revealed that replacing sand in the concrete mix with recycled plastic enhanced workability, which was attributed to the hydrophobic nature of the plastic particles. However, both compressive and tensile strength exhibited a declining trend. Additionally, after undergoing multiple freezing and thawing cycles, the concrete mix exhibited poor durability properties and brittleness. These issues may arise due to factors such as incompatibility, non-uniformity, reduced cohesion, and the lower density of plastic particles.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Computing, Engineering and Science, University of South Wales, Pontypridd CF37 1DL, UK.
- Department of Civil Engineering, Faculty of Engineering, Rivers State University, Porth Harcourt PMB 5080, Rivers State, Nigeria.
ORCID-Profile: Jonathan Oti, Blessing O Adeleke, John M Kinuthia
Förderung
- Taith funding
Zitieren
APA
Oti, J., Adeleke, B. O., Rathnayake, M., Kinuthia, J. M., & Ekwulo, E. (2024). Strength and Durability Characterization of Structural Concrete Made of Recycled Plastic. Materials, 17(8), 1841. https://doi.org/10.3390/ma17081841
Vancouver
Oti J, Adeleke BO, Rathnayake M, Kinuthia JM, Ekwulo E. Strength and Durability Characterization of Structural Concrete Made of Recycled Plastic. Materials. 2024;17(8):1841. doi:10.3390/ma17081841
BibTeX
@article{Oti2024,
author = {Oti, Jonathan and Adeleke, Blessing O and Rathnayake, Mihiri and Kinuthia, John M and Ekwulo, Emma},
title = {Strength and Durability Characterization of Structural Concrete Made of Recycled Plastic},
journal = {Materials},
year = {2024},
volume = {17},
number = {8},
pages = {1841},
doi = {10.3390/ma17081841}
}
EUVIMED