Mechanical Properties of a Sustainable Low-Carbon Geopolymer Concrete Using a Pumice-Derived Sodium Silicate Solution
Materials · 13.04.2024 · 17 (8) · 1792
DOI: 10.3390/ma17081792 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.04.2024. Verfasst von Jonathan Oti und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Computing, Engineering and Science, University of South Wales, Pontypridd CF37 1DL, UK. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 84 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Taith Funding.
Abstract (Originalsprache)
A geopolymer is an inorganic amorphous cementitious material, emerging as an alternative sustainable binder for greener concrete production over Ordinary Portland Cement (OPC). Geopolymer concrete production promotes waste reuse since the applicable precursor materials include agricultural and industrial waste that requires disposal, helping to reduce waste in landfills and ensuring sustainable environmental protection. This study investigates the development of an environmentally friendly sodium silicate alternative (SSA) derived from pumice powder (PP) in place of a commercial Na2SiO3 solution at a 10 M concentration. Six concrete batches were produced at alkaline/precursor (A/P) ratios of 0.1, 0.2, 0.3, 0.4, and 0.5. The geopolymer mix AF4, with an A/P ratio of 0.4, became the optimum geopolymer concrete design; however, it recorded lower compressive, tensile splitting, and flexural strengths, respectively, against the control OPC concrete. The geopolymer formulations, however, obtained 28-day-hardened concrete densities comparable to the control concrete. The 28-day compressive strength of the OPC concrete was 29.4 MPa, higher than the 18.8 MPa recorded for AF4. However, the 56-day strength of AF4 improved to 22.4 MPa, an around 19% increase compared to the 30.8 MPa achieved by the control mix on day 56, having experienced only a 5% strength increase. The low mechanical performances of the geopolymer formulation could be attributed to extra water added to the original geopolymer design to improve the workability of the geopolymer mix. Therefore, the SSA alkaline solution using PP showed some potential for developing geopolymer concrete for low-strength construction applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Computing, Engineering and Science, University of South Wales, Pontypridd CF37 1DL, UK.
- Department of Civil Engineering, Faculty of Engineering, Rivers State University, Porth Harcourt PMB 5080, Nigeria.
ORCID-Profile: Jonathan Oti, Blessing O Adeleke, John M Kinuthia
Förderung
- Taith Funding
Zitieren
APA
Oti, J., Adeleke, B. O., Anowie, F. X., Kinuthia, J. M., & Ekwulo, E. (2024). Mechanical Properties of a Sustainable Low-Carbon Geopolymer Concrete Using a Pumice-Derived Sodium Silicate Solution. Materials, 17(8), 1792. https://doi.org/10.3390/ma17081792
Vancouver
Oti J, Adeleke BO, Anowie FX, Kinuthia JM, Ekwulo E. Mechanical Properties of a Sustainable Low-Carbon Geopolymer Concrete Using a Pumice-Derived Sodium Silicate Solution. Materials. 2024;17(8):1792. doi:10.3390/ma17081792
BibTeX
@article{Oti2024,
author = {Oti, Jonathan and Adeleke, Blessing O and Anowie, Francis X and Kinuthia, John M and Ekwulo, Emma},
title = {Mechanical Properties of a Sustainable Low-Carbon Geopolymer Concrete Using a Pumice-Derived Sodium Silicate Solution},
journal = {Materials},
year = {2024},
volume = {17},
number = {8},
pages = {1792},
doi = {10.3390/ma17081792}
}
EUVIMED