EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Interface Modification on the Moisture Absorption and Thermal Resistance of Ramie Fiber/Degradable Epoxy Composites

Jingqi Geng, Yingchun Cai

Materials · 12.04.2024 · 17 (8) · 1779

DOI: 10.3390/ma17081779 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.04.2024. Verfasst von Jingqi Geng und 1 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Bio-Based Material Science and Technology of Ministry of Education, School of Material Science and Engineering, Northeast Forestry …. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Natural fiber/degradable epoxy composites have received much attention for their advantages of low carbon emissions, low environmental pollution, and utilization of renewable resources. However, the poor interfacial bonding strength and inferior moisture resistance of natural fiber/degradable epoxy composites restrict their application areas. In order to improve the moisture and heat resistance of natural fiber/degradable epoxy resin-based composites, this study modified the surfaces of ramie fibers with hydroxylated carbon nanotubes, silane coupling agents, and sodium hydroxide, respectively. Three types of modified ramie fiber/degradable epoxy composites, namely F-CN-DEP, F-Si-DEP, and F-OH-DEP, were prepared using a winding forming process. The water absorption rate and short-beam shear strength of the materials were tested under different environments, and the fiber morphology and thermal–mechanical properties of the materials were investigated by scanning electron microscopy (SEM) and dynamic mechanical analysis (DMA). The results show that F-CN-DEP exhibited the lowest moisture absorption rate; the highest shear strength, of 43.8 MPa; and a glass transition temperature (Tg) of 121.7 °C. The results demonstrate that carbon nanotubes on the fiber surface can improve the interfacial stability of ramie fiber/degradable epoxy composites in humid and hot environments. These results give guidelines for the development of natural fiber/degradable epoxy composites.

Schlagwörter

Stichwörter der Autor:innen

degradable epoxyinterfacial strengthnatural fiberthermal resistance

Autor:innen und Institutionen

  • Key Laboratory of Bio-Based Material Science and Technology of Ministry of Education, School of Material Science and Engineering, Northeast Forestry University, Harbin 150040, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Geng, J., & Cai, Y. (2024). Influence of Interface Modification on the Moisture Absorption and Thermal Resistance of Ramie Fiber/Degradable Epoxy Composites. Materials, 17(8), 1779. https://doi.org/10.3390/ma17081779

Vancouver

Geng J, Cai Y. Influence of Interface Modification on the Moisture Absorption and Thermal Resistance of Ramie Fiber/Degradable Epoxy Composites. Materials. 2024;17(8):1779. doi:10.3390/ma17081779

BibTeX
@article{Geng2024,
  author = {Geng, Jingqi and Cai, Yingchun},
  title = {Influence of Interface Modification on the Moisture Absorption and Thermal Resistance of Ramie Fiber/Degradable Epoxy Composites},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {8},
  pages = {1779},
  doi = {10.3390/ma17081779}
}
Kostenlos starten →