Characterisation of Adobe and Mud–Straw for the Restoration and Rehabilitation of Persian Historical Adobe Buildings
Materials · 11.04.2024 · 17 (8) · 1764
DOI: 10.3390/ma17081764 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 11.04.2024. Verfasst von Bina Hejazi und 4 weiteren Autor:innen. Beteiligte Einrichtung: Materials Testing Institute (MPA), University of Stuttgart, 70569 Stuttgart, Germany. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In the restoration or rehabilitation of traditional buildings, compatible materials with known characteristics must be used. However, the existing literature lacks comprehensive studies on the characterisation of Persian mud–straw plaster, focusing primarily on Persian adobe. Moreover, previous research on Persian adobe has primarily employed XRF and XRD tests, neglecting ion chromatography, moisture sorption isotherm determination, and thermogravimetric analysis with differential scanning calorimetry. Consequently, there is a shortage of information regarding the elemental composition, mineralogical characteristics, moisture sorption behaviour, and thermal properties of Persian mud–straw plaster, as well as Persian adobe bricks. This paper aims to address this research gap by examining historical and new adobe bricks and mud–straw plaster used in Iran, utilising a comprehensive array of analytical techniques. The results from XRF analysis reveal relatively similar chemical compositions across all samples, while XRD analysis indicates predominantly similar mineral phases. Ion chromatography results demonstrate higher conductivity and chloride concentrations in the mud–straw samples than the adobe samples, with higher values for new samples than historical ones. Freshly used straw, clay, or soil may have higher chloride concentrations caused by the arid climate and soil salinisation in the area. Additionally, moisture sorption isotherm determination results show that adobe and mud–straw plaster with a higher salt load of chlorides have significantly higher moisture absorption. The increased straw quantity in the samples increases the moisture content. Furthermore, thermogravimetric analysis and differential scanning calorimetry indicate that, at low heating, adobe and mud–straw plaster lose water due to dehydration, and at high heating, they lose carbon dioxide due to decarboxylation. The comprehensive characterisation of Persian adobe and mud–straw plaster in this study fills a significant gap in the literature and offers invaluable insights for informing restoration and rehabilitation processes, ensuring the compatibility of the materials used.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Materials Testing Institute (MPA), University of Stuttgart, 70569 Stuttgart, Germany.
ORCID-Profile: Bina Hejazi, Jürgen Frick
Zitieren
APA
Hejazi, B., Luz, C., Grüner, F., Frick, J., & Garrecht, H. (2024). Characterisation of Adobe and Mud–Straw for the Restoration and Rehabilitation of Persian Historical Adobe Buildings. Materials, 17(8), 1764. https://doi.org/10.3390/ma17081764
Vancouver
Hejazi B, Luz C, Grüner F, Frick J, Garrecht H. Characterisation of Adobe and Mud–Straw for the Restoration and Rehabilitation of Persian Historical Adobe Buildings. Materials. 2024;17(8):1764. doi:10.3390/ma17081764
BibTeX
@article{Hejazi2024,
author = {Hejazi, Bina and Luz, Corinna and Grüner, Friedrich and Frick, Jürgen and Garrecht, Harald},
title = {Characterisation of Adobe and Mud–Straw for the Restoration and Rehabilitation of Persian Historical Adobe Buildings},
journal = {Materials},
year = {2024},
volume = {17},
number = {8},
pages = {1764},
doi = {10.3390/ma17081764}
}
EUVIMED