EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure Evolution and Fretting Wear Mechanisms of Steels Undergoing Oscillatory Sliding Contact in Dry Atmosphere

Alyssa A Maich, Ronald Gronsky, Kyriakos Komvopoulos iD

Materials · 10.04.2024 · 17 (8) · 1737

DOI: 10.3390/ma17081737 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.04.2024. Verfasst von Alyssa A Maich und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, University of California, Berkeley, CA 94720, USA. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Siemens (Sweden).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Variations in the microstructure and the dominant fretting wear mechanisms of carbon steel alloy in oscillatory sliding contact against stainless steel in a dry atmosphere were evaluated by various mechanical testing and microanalytical methods. These included scanning electron microscopy and energy dispersive spectrometry with corresponding elemental maps of the wear tracks, in conjunction with cross-sectional transmission electron microscopy of samples prepared by focused ion beam machining to assess subsurface and through-thickness changes in microstructure, all as a function of applied load and sliding time. Heavily dislocated layered microstructures were observed below the wear tracks to vary with both the load and sliding time. During the accumulation of fretting cycles, the subsurface microstructure evolved into stable dislocation cells with cell walls aligned parallel to the surface and the sliding direction. The thickness of the damaged subsurface region increased with the load, consistent with the depth distribution of the maximum shear stress. The primary surface oxide evolved as Fe2O3 and Fe3O4 with increasing sliding time, leading to the formation of a uniform oxide scale at the sliding surface. It is possible that the development of the dislocation cell structure in the subsurface also enhanced oxidation by pipe diffusion along dislocation cores. The results of this study reveal complex phase changes affecting the wear resistance of steels undergoing fretting wear, which involve a synergy between oxidative wear, crack initiation, and crack growth along dislocation cell walls due to the high strains accumulating under high loads and/or prolonged surface sliding.

Schlagwörter

Stichwörter der Autor:innen

cracksdislocation cell wallsfrettingmicrostructureoxidationphase transformationsteelwear mechanisms

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, University of California, Berkeley, CA 94720, USA.
  • Department of Mechanical Engineering, University of California, Berkeley, CA 94720, USA.

ORCID-Profile: Kyriakos Komvopoulos

Förderung

  • Siemens (Sweden)

Zitieren

APA

Maich, A. A., Gronsky, R., & Komvopoulos, K. (2024). Microstructure Evolution and Fretting Wear Mechanisms of Steels Undergoing Oscillatory Sliding Contact in Dry Atmosphere. Materials, 17(8), 1737. https://doi.org/10.3390/ma17081737

Vancouver

Maich AA, Gronsky R, Komvopoulos K. Microstructure Evolution and Fretting Wear Mechanisms of Steels Undergoing Oscillatory Sliding Contact in Dry Atmosphere. Materials. 2024;17(8):1737. doi:10.3390/ma17081737

BibTeX
@article{Maich2024,
  author = {Maich, Alyssa A and Gronsky, Ronald and Komvopoulos, Kyriakos},
  title = {Microstructure Evolution and Fretting Wear Mechanisms of Steels Undergoing Oscillatory Sliding Contact in Dry Atmosphere},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {8},
  pages = {1737},
  doi = {10.3390/ma17081737}
}
Kostenlos starten →