EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Macro Fibers on the Permeability and Crack Surface Topography of Layered Fiber Reinforced Concrete

Wei Zeng, Weiqi Wang, Qiannan Wang iD, Mengya Li iD, Lining Zhang, Yunyun Tong

Materials · 10.04.2024 · 17 (8) · 1733

DOI: 10.3390/ma17081733 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.04.2024. Verfasst von Wei Zeng und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering and Architecture, Zhejiang University of Science and Technology, Hangzhou 310023, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang Provincial Natural Science Foundation, National Natural Science Foundation of China, Science Fund Project of Department of Education of Zhejiang Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper describes the effects of macro fibers on permeability and crack surface topography of layered fiber-reinforced concrete (FRC) specimens with different layering ratios under uniaxial tensile load. The crack permeability of layered FRC specimens is investigated by a self-designed permeability setup. The topographical analysis of crack surfaces is investigated by a custom-designed laser scanning setup. The results show that when the fiber volume content and layering ratio of the FRC layer are constant, the tensile toughness of layered FRC specimens depends on the proportion of steel fiber in macro fibers, and with an increase in the proportion of steel fiber, the tensile toughness of layered FRC specimens increases. For the layered FRC specimens, the crack permeability is much lower than that of the normal concrete (NC) specimen. A significant positive synergistic effect on crack impermeability can be achieved by the combination of steel fiber and polypropylene fiber in the SF80PP2.3 specimen. The crack surface roughness parameter (Rn) values of the NC layer in layered FRC specimens are all higher than those of the NC specimen, and the crack surface Rn of the FRC layer in layered FRC specimens is higher than that of the unlayered FRC specimens. This can effectively increase the head loss of cracks and reduce the crack permeability of layered FRC specimens.

Schlagwörter

Stichwörter der Autor:innen

crack surface topographylayered fiber-reinforced concretelayering ratiopermeabilityuniaxial tensile load

Autor:innen und Institutionen

  • School of Civil Engineering and Architecture, Zhejiang University of Science and Technology, Hangzhou 310023, China.
  • Zhejiang International Science and Technology Cooperation Base for Waste Resource Recycling and Low-Carbon Building Materials Technology, Zhejiang University of Science and Technology, Hangzhou 310023, China.
  • Zhejiang Construction Investment Group Co., Ltd., Hangzhou 310013, China.
  • L2MGC, EA 4114, CY Cergy Paris Université, 95000 Cergy, France.
  • Department of Mechanical and Mechatronics Engineering, The University of Auckland, Auckland 1010, New Zealand.

ORCID-Profile: Qiannan Wang, Mengya Li

Förderung

  • Zhejiang Provincial Natural Science Foundation
  • National Natural Science Foundation of China
  • Science Fund Project of Department of Education of Zhejiang Province
  • Zhejiang Provincial Natural Science Foundation of China

Zitieren

APA

Zeng, W., Wang, W., Wang, Q., Li, M., Zhang, L., & Tong, Y. (2024). Effect of Macro Fibers on the Permeability and Crack Surface Topography of Layered Fiber Reinforced Concrete. Materials, 17(8), 1733. https://doi.org/10.3390/ma17081733

Vancouver

Zeng W, Wang W, Wang Q, Li M, Zhang L, Tong Y. Effect of Macro Fibers on the Permeability and Crack Surface Topography of Layered Fiber Reinforced Concrete. Materials. 2024;17(8):1733. doi:10.3390/ma17081733

BibTeX
@article{Zeng2024,
  author = {Zeng, Wei and Wang, Weiqi and Wang, Qiannan and Li, Mengya and Zhang, Lining and Tong, Yunyun},
  title = {Effect of Macro Fibers on the Permeability and Crack Surface Topography of Layered Fiber Reinforced Concrete},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {8},
  pages = {1733},
  doi = {10.3390/ma17081733}
}
Kostenlos starten →