EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Critical Assessment of Novel Developments in HPGR Technology Using DEM

Victor A Rodriguez iD, Gabriel K P Barrios iD, Túlio M Campos iD, Luís Marcelo Tavares iD

Materials · 04.04.2024 · 17 (7) · 1665

DOI: 10.3390/ma17071665 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.04.2024. Verfasst von Victor A Rodriguez und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Metallurgical and Materials Engineering, Universidade Federal do Rio de Janeiro, Rio de Janeiro 21941-972, Brazil. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro, National Council for Scientific and Technological Development, FAPERJ—Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Advances in high-pressure grinding roll (HGPR) technology since its first commercial application in the cement industry include new roll wear protection techniques and new confinement systems. The latter contribute to reductions in the edge effects in an attempt to reach a more homogenous product size along the rolls. Additional advances in this technology have been made in recent years, while modeling and simulation tools are also reaching maturity and can now be used to subject such novel developments to detailed scrutiny. This work applies a hybrid approach combining advanced simulations using the discrete element method, the particle replacement model and multibody dynamics to a phenomenological population balance model to critically assess two recent advances in HPGR technology: spring-loaded cheek plates and the offset roller press. Force and torque controllers, included in the EDEM 2022.1 software, were used to describe the responses of the geometries in contact with the granular material processed. Simulations showed that while the former successfully reduced the lateral bypass of the material by as much as 65% when cheek plates became severely worn, the latter demonstrated lower throughput and higher potential wear but an ability to generate a finer product than the traditional design.

Schlagwörter

Stichwörter der Autor:innen

Tavares breakage modelcomminutiondiscrete element methodhigh-pressure grinding rollssimulation

Autor:innen und Institutionen

  • Department of Metallurgical and Materials Engineering, Universidade Federal do Rio de Janeiro, Rio de Janeiro 21941-972, Brazil.

ORCID-Profile: Victor A Rodriguez, Gabriel K P Barrios, Túlio M Campos, Luís Marcelo Tavares

Förderung

  • Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro
  • National Council for Scientific and Technological Development
  • FAPERJ—Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro
  • Brazilian agency CNPq

Zitieren

APA

Rodriguez, V. A., Barrios, G. K. P., Campos, T. M., & Tavares, L. M. (2024). Critical Assessment of Novel Developments in HPGR Technology Using DEM. Materials, 17(7), 1665. https://doi.org/10.3390/ma17071665

Vancouver

Rodriguez VA, Barrios GKP, Campos TM, Tavares LM. Critical Assessment of Novel Developments in HPGR Technology Using DEM. Materials. 2024;17(7):1665. doi:10.3390/ma17071665

BibTeX
@article{Rodriguez2024,
  author = {Rodriguez, Victor A and Barrios, Gabriel K P and Campos, Túlio M and Tavares, Luís Marcelo},
  title = {Critical Assessment of Novel Developments in HPGR Technology Using DEM},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {7},
  pages = {1665},
  doi = {10.3390/ma17071665}
}
Kostenlos starten →