Towards Understanding {10-11}-{10-12} Secondary Twinning Behaviors in AZ31 Magnesium Alloy during Fatigue Deformation
Materials · 31.03.2024 · 17 (7) · 1594
DOI: 10.3390/ma17071594 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 31.03.2024. Verfasst von Yunxiang You und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Chongqing University of Technology, Chongqing 400054, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Chongqing, Science and Technology Research Program of Chongqing Municipal Education Commission.
Abstract (Originalsprache)
Tensile-compression fatigue deformation tests were conducted on AZ31 magnesium alloy at room temperature. Electron backscatter diffraction (EBSD) scanning electron microscopy was used to scan the microstructure near the fatigue fracture surface. It was found that lamellar {10-11}-{10-12} secondary twins (STs) appeared inside primary {10-11} contraction twins (CTs), with a morphology similar to the previously discovered {10-12}-{10-12} STs. However, through detailed misorientation calibration, it was determined that this type of secondary twin is {10-11}-{10-12} ST. Through calculation and analysis, it was found that the matrix was under compressive stress in the normal direction (ND) during fatigue deformation, which was beneficial for the activation of primary {10-11} CTs. The local strain accommodation was evaluated based on the geometric compatibility parameter (m’) combined with the Schmid factor (SF) of the slip system, leading us to propose and discuss the possible formation mechanism of this secondary twin. The analysis results indicate that when the local strain caused by basal slip at the twin boundaries cannot be well transmitted, {10-11}-{10-12} STs are activated to coordinate the strain, and different loading directions lead to different formation mechanisms. Moreover, from the microstructure characterization near the entire fracture surface, we surmise that the presence of such secondary twins is not common.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Chongqing University of Technology, Chongqing 400054, China.
- Chongqing Yujiang Die-Casting Co., Ltd., Chongqing 400000, China.
- College of Engineering, Zhejiang Normal University, Jinhua 321004, China.
ORCID-Profile: Yunxiang You
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Chongqing
- Science and Technology Research Program of Chongqing Municipal Education Commission
- Cultivation Plan of Scientific Research and Innovation Team of Chongqing University of Technology
- Postdoctoral Research Project of Chongqing Human Resources and Social Security Bureau
- Science and Technology Research Program of the Chongqing Municipal Education Commission
- Postdoctoral Research Project of the Chongqing Human Resources and Social Security Bureau
Zitieren
APA
You, Y., Tan, L., Yan, Y., Zhou, T., Yang, P., Tu, J., & Zhou, Z. (2024). Towards Understanding {10-11}-{10-12} Secondary Twinning Behaviors in AZ31 Magnesium Alloy during Fatigue Deformation. Materials, 17(7), 1594. https://doi.org/10.3390/ma17071594
Vancouver
You Y, Tan L, Yan Y, Zhou T, Yang P, Tu J, et al. Towards Understanding {10-11}-{10-12} Secondary Twinning Behaviors in AZ31 Magnesium Alloy during Fatigue Deformation. Materials. 2024;17(7):1594. doi:10.3390/ma17071594
BibTeX
@article{You2024,
author = {You, Yunxiang and Tan, Li and Yan, Yuqin and Zhou, Tao and Yang, Pengfei and Tu, Jian and Zhou, Zhiming},
title = {Towards Understanding 10-11-10-12 Secondary Twinning Behaviors in AZ31 Magnesium Alloy during Fatigue Deformation},
journal = {Materials},
year = {2024},
volume = {17},
number = {7},
pages = {1594},
doi = {10.3390/ma17071594}
}
EUVIMED