Research on the Properties of Steel Slag with Different Preparation Processes
Materials · 28.03.2024 · 17 (7) · 1555
DOI: 10.3390/ma17071555 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.03.2024. Verfasst von Xingbei Liu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Traffic and Transportation Engineering, National Engineering Research Center of Highway Maintenance Technology, Changsha University of Scie…. Die Arbeit wurde bisher 38-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The 2022 National College Students ' Innovation and Entrepreneurship Training Program of Changsha University of Science and Technology, The National Natural Science Foundation of China, the Science and Technology Innovation Program of Hunan Province.
Abstract (Originalsprache)
To promote the resource utilization of steel slag and improve the production process of steel slag in steelmaking plants, this research studied the characteristics of three different processed steel slags from four steelmaking plants. The physical and mechanical characteristics and volume stability of steel slags were analyzed through density, water absorption, and expansion tests. The main mineral phases, morphological characteristics, and thermal stability of the original steel slag and the steel slag after the expansion test are analyzed with X-ray diffractometer (XRD), scanning electron microscope (SEM), and thermogravimetric analysis (TG) tests. The results show that the composition of steel slag produced by different processes is similar. The main active substances of other processed steel slags are dicalcium silicate (C2S), tricalcium silicate (C3S), CaO, and MgO. After the expansion test, the main chemical products of steel slag are CaCO3, MgCO3, and calcium silicate hydrate (C-S-H). Noticeable mineral crystals appeared on the surface of the steel slag after the expansion test, presenting tetrahedral or cigar-like protrusions. The drum slag had the highest density and water stability. The drum slag had the lowest porosity and the densest microstructure surface, compared with steel slags that other methods produce. The thermal stability of steel slag treated by the hot splashing method was relatively higher than that of steel slag treated by the other two methods.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Traffic and Transportation Engineering, National Engineering Research Center of Highway Maintenance Technology, Changsha University of Science & Technology, Changsha 410114, China.
- Shanghai Municipal Engineering Design & Research Institute (Group) Co., Ltd., Shanghai 200092, China.
ORCID-Profile: Xingbei Liu, Chao Zhang, Huanan Yu, Hongyu Zhou, Yixiong Zhong
Förderung
- The 2022 National College Students ' Innovation and Entrepreneurship Training Program of Changsha University of Science and Technology
- The National Natural Science Foundation of China
- the Science and Technology Innovation Program of Hunan Province
- the Postgraduate Scientific Research Innovation Project of Hunan Province
- the 2022 National College Students’ Innovative Entrepreneurial Training Plan Program
Zitieren
APA
Liu, X., Zhang, C., Yu, H., Qian, G., Zheng, X., Zhou, H., Huang, L., Zhang, F., & Zhong, Y. (2024). Research on the Properties of Steel Slag with Different Preparation Processes. Materials, 17(7), 1555. https://doi.org/10.3390/ma17071555
Vancouver
Liu X, Zhang C, Yu H, Qian G, Zheng X, Zhou H, et al. Research on the Properties of Steel Slag with Different Preparation Processes. Materials. 2024;17(7):1555. doi:10.3390/ma17071555
BibTeX
@article{Liu2024,
author = {Liu, Xingbei and Zhang, Chao and Yu, Huanan and Qian, Guoping and Zheng, Xiaoguang and Zhou, Hongyu and Huang, Lizhang and Zhang, Feng and Zhong, Yixiong},
title = {Research on the Properties of Steel Slag with Different Preparation Processes},
journal = {Materials},
year = {2024},
volume = {17},
number = {7},
pages = {1555},
doi = {10.3390/ma17071555}
}
EUVIMED