Roles of Al and Mg on the Microstructure and Corrosion Resistance of Zn-Al-Mg Hot-Dipped Coated Steel
Materials · 27.03.2024 · 17 (7) · 1512
DOI: 10.3390/ma17071512 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 27.03.2024. Verfasst von Taixiong Guo und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization, Pangang Group Research Institute Co., Ltd., Panzhihua 617000, Chin…. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key project of Sichuan Provincial Natural Science Foundation, Key scientific and technological project of the Sichuan Provincial, the Innovation and entrepreneurship training program for college students of Sichuan University of light technology provincial level.
Abstract (Originalsprache)
In this work, a novel zinc–aluminum–magnesium (Zn-Al-Mg, ZM) coated steel was prepared using the hot-dip method. The microstructure and corrosion resistance of the ZM-coated steel were investigated. Compared to the conventional galvanized steel (GI), the ZM coating demonstrated a distinctive phase structure, consisting of Zn phase, binary eutectic (Zn/MgZn2), and ternary eutectic (Zn/Al/MgZn2). The corrosion resistance of the ZM-coated and GI-coated steels was evaluated by neutral salt spray test (NSST), polarization and electrochemical impedance spectroscopy (EIS). The results indicated that ZM-coated steel provided superior long-term corrosion protection in a NaCl environment compared to GI-coated steel. The scanning vibrating electrode technique (SVET) proved to be an effective method for investigating the evolution of the anodic and cathodic on the local coating surface. GI-coated steel exhibited a potential and current density distribution between the cathodic and anodic sites nearly three orders of magnitude higher than that of ZM-coated steel, suggesting a higher corrosion rate for GI-coated steel.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization, Pangang Group Research Institute Co., Ltd., Panzhihua 617000, China.
- School of Materials Science and Engineering, Sichuan University of Science & Engineering, Zigong 643000, China.
- Pangang Group Panzhihua Steel and Vanadium Co., Ltd., Panzhihua 617017, China.
- Material Corrosion and Protection Key Laboratory of Sichuan Province, Sichuan University of Science & Engineering, Zigong 643000, China.
- Zigong Ligong Technic Co., Ltd., Zigong 643000, China.
ORCID-Profile: Baojie Dou
Förderung
- Key project of Sichuan Provincial Natural Science Foundation
- Key scientific and technological project of the Sichuan Provincial
- the Innovation and entrepreneurship training program for college students of Sichuan University of light technology provincial level
- Innovation and entrepreneurship training program for college students of Sichuan University of light technology
Zitieren
APA
Guo, T., Wang, Y., Yu, L., Jin, Y., Zeng, B., Dou, B., Liu, X., & Lin, X. (2024). Roles of Al and Mg on the Microstructure and Corrosion Resistance of Zn-Al-Mg Hot-Dipped Coated Steel. Materials, 17(7), 1512. https://doi.org/10.3390/ma17071512
Vancouver
Guo T, Wang Y, Yu L, Jin Y, Zeng B, Dou B, et al. Roles of Al and Mg on the Microstructure and Corrosion Resistance of Zn-Al-Mg Hot-Dipped Coated Steel. Materials. 2024;17(7):1512. doi:10.3390/ma17071512
BibTeX
@article{Guo2024,
author = {Guo, Taixiong and Wang, Yuhao and Yu, Liusi and Jin, Yongqing and Zeng, Bitao and Dou, Baojie and Liu, Xiaoling and Lin, Xiuzhou},
title = {Roles of Al and Mg on the Microstructure and Corrosion Resistance of Zn-Al-Mg Hot-Dipped Coated Steel},
journal = {Materials},
year = {2024},
volume = {17},
number = {7},
pages = {1512},
doi = {10.3390/ma17071512}
}
EUVIMED