Hot Deformation Behavior and Microstructural Evolution of a TiB2/Al-Zn-Mg-Cu-Zr Composite
Materials · 25.03.2024 · 17 (7) · 1487
DOI: 10.3390/ma17071487 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 25.03.2024. Verfasst von Jingcun Huang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of China.
Abstract (Originalsprache)
In the present work, the hot deformation behavior and microstructural evolution of a TiB2/Al-Zn-Mg-Cu-Zr composite were studied. Hot compression tests were conducted within a temperature range of 370 °C to 490 °C and a strain rate of 0.001 s−1 to 10 s−1. We established the Arrhenius constitutive equation with Zener–Hollomon parameters and processing maps and discussed the microstructural evolution during hot deformation. The results indicated that the safe processing parameter region falls within 370 °C–490 °C and 0.001 s−1–0.025 s−1. The influence of the strain rate on the safe processing range is more dominant than that of deformation temperature, which is primarily attributed to TiB2. Dynamic softening is primarily governed by dynamic recovery (DRV). Small particles (η, Al3Zr) can pin dislocations, promoting the rearrangement and annihilation of dislocations and facilitating DRV. Higher temperatures and lower strain rates facilitated dynamic recrystallization (DRX). Continuous dynamic recrystallization (CDRX) occurs near high-angle grain boundaries induced by strain-induced boundary migration (SIBM). TiB2 and large second-phase particles generate high-density geometrically necessary dislocations (GNBs) during hot deformation, which serve as nucleation sites for discontinuous dynamic recrystallization (DDRX). This enhances dynamic softening and improves formability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China.
ORCID-Profile: Ziyong Chen
Förderung
- Natural Science Foundation of China
Zitieren
APA
Huang, J., Xiang, Z., Li, M., Li, L., & Chen, Z. (2024). Hot Deformation Behavior and Microstructural Evolution of a TiB2/Al-Zn-Mg-Cu-Zr Composite. Materials, 17(7), 1487. https://doi.org/10.3390/ma17071487
Vancouver
Huang J, Xiang Z, Li M, Li L, Chen Z. Hot Deformation Behavior and Microstructural Evolution of a TiB2/Al-Zn-Mg-Cu-Zr Composite. Materials. 2024;17(7):1487. doi:10.3390/ma17071487
BibTeX
@article{Huang2024,
author = {Huang, Jingcun and Xiang, Zhilei and Li, Meng and Li, Leizhe and Chen, Ziyong},
title = {Hot Deformation Behavior and Microstructural Evolution of a TiB2/Al-Zn-Mg-Cu-Zr Composite},
journal = {Materials},
year = {2024},
volume = {17},
number = {7},
pages = {1487},
doi = {10.3390/ma17071487}
}
EUVIMED