EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Non-Conventional Wing Structure Design with Lattice Infilled through Design for Additive Manufacturing

Numan Khan iD, Valerio Acanfora iD, Aniello Riccio iD

Materials · 23.03.2024 · 17 (7) · 1470

DOI: 10.3390/ma17071470 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.03.2024. Verfasst von Numan Khan und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering, University of Campania "Luigi Vanvitelli", via Roma, 29, 81031 Aversa, Italy. Die Arbeit wurde bisher 42-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lightweight structures with a high stiffness-to-weight ratio always play a significant role in weight reduction in the aerospace sector. The exploration of non-conventional structures for aerospace applications has been a point of interest over the past few decades. The adaptation of lattice structure and additive manufacturing in the design can lead to improvement in mechanical properties and significant weight reduction. The practicality of the non-conventional wing structure with lattices infilled as a replacement for the conventional spar–ribs wing is determined through finite element analysis. The optimal lattice-infilled wing structures are obtained via an automated iterative method using the commercial implicit modeling tool nTop and an ANSYS workbench. Among five different types of optimized lattice-infilled structures, the Kelvin lattice structure is considered the best choice for current applications, with comparatively minimal wing-tip deflection, weight, and stress. Furthermore, the stress distribution dependency on the lattice-unit cell type and arrangement is also established. Conclusively, the lattice-infilled structures have shown an alternative innovative design approach for lightweight wing structures.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingfinite element analysislattice-infilled designlightweight structuresnon-conventional wing structure

Autor:innen und Institutionen

  • Department of Engineering, University of Campania "Luigi Vanvitelli", via Roma, 29, 81031 Aversa, Italy.

ORCID-Profile: Numan Khan, Valerio Acanfora, Aniello Riccio

Zitieren

APA

Khan, N., Acanfora, V., & Riccio, A. (2024). Non-Conventional Wing Structure Design with Lattice Infilled through Design for Additive Manufacturing. Materials, 17(7), 1470. https://doi.org/10.3390/ma17071470

Vancouver

Khan N, Acanfora V, Riccio A. Non-Conventional Wing Structure Design with Lattice Infilled through Design for Additive Manufacturing. Materials. 2024;17(7):1470. doi:10.3390/ma17071470

BibTeX
@article{Khan2024,
  author = {Khan, Numan and Acanfora, Valerio and Riccio, Aniello},
  title = {Non-Conventional Wing Structure Design with Lattice Infilled through Design for Additive Manufacturing},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {7},
  pages = {1470},
  doi = {10.3390/ma17071470}
}
Kostenlos starten →