EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of Liquid–Liquid Reaction Phenomena of Aluminum in Calcium Silicate Slag

Harald G R Philipson, Maria Wallin iD, Kristian Etienne Einarsrud iD

Materials · 22.03.2024 · 17 (7) · 1466

DOI: 10.3390/ma17071466 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.03.2024. Verfasst von Harald G R Philipson und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Faculty of Natural Sciences, Norwegian University of Science and Technology (NTNU), 7034 Trondheim, …. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union's Horizon 2020 research and innovation program, European Union’s Horizon 2020 research and innovation program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To achieve better process control of silicon (Si) alloy production using aluminum as a reductant of calcium silicate (CaO-SiO2) slag, it is necessary to understand the reaction phenomena concerning the behavior of formed phases at the metal-slag interface during conversion. The interfacial interaction behavior of non-agitated melt was investigated using the sessile drop method for varying time and temperature, followed by EPMA phase analysis at the vicinity of the metal–slag interface. The most remarkable features of the reaction were the accumulation of solid calcium aluminate product layers at the Al alloy–slag interface and spontaneous emulsion of Si-alloy droplets in the slag phase. The reduction is strictly limited at 1550 °C due to the slow transfer of calcium aluminates away from the metal-slag interface into the partially liquid bulk slag. Reduction was significantly improved at 1600–1650 °C despite an interfacial layer being present, where the conversion rate is most intense in the first minutes of the liquid–liquid contact. A high mass transfer rate across the interface was shown related to the apparent interfacial tension depression of the wetting droplet along with a significant perturbed interface and emulsion due to Kelvin–Helmholtz instability driven by built-up interfacial charge at the interface. The increased reaction rate observed from 1550 °C to 1600–1650 °C for the non-agitated melt was attributed to the advantageous physical properties of the slag phase, which can be further regulated by the stoichiometry of metal–slag interactions and the composition of the slag.

Schlagwörter

Stichwörter der Autor:innen

aluminothermiccalcium aluminate slagmetal–slag interfacial reaction phenomenasilicon

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Faculty of Natural Sciences, Norwegian University of Science and Technology (NTNU), 7034 Trondheim, Norway.

ORCID-Profile: Maria Wallin, Kristian Etienne Einarsrud

Förderung

  • European Union's Horizon 2020 research and innovation program
  • European Union’s Horizon 2020 research and innovation program

Zitieren

APA

Philipson, H. G. R., Wallin, M., & Einarsrud, K. E. (2024). Investigation of Liquid–Liquid Reaction Phenomena of Aluminum in Calcium Silicate Slag. Materials, 17(7), 1466. https://doi.org/10.3390/ma17071466

Vancouver

Philipson HGR, Wallin M, Einarsrud KE. Investigation of Liquid–Liquid Reaction Phenomena of Aluminum in Calcium Silicate Slag. Materials. 2024;17(7):1466. doi:10.3390/ma17071466

BibTeX
@article{Philipson2024,
  author = {Philipson, Harald G R and Wallin, Maria and Einarsrud, Kristian Etienne},
  title = {Investigation of Liquid–Liquid Reaction Phenomena of Aluminum in Calcium Silicate Slag},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {7},
  pages = {1466},
  doi = {10.3390/ma17071466}
}
Kostenlos starten →