EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of High-Frequency Measurement Errors from Turned Surface Topography Data Using Machine Learning Methods

Przemysław Podulka iD, Monika Kulisz iD, Katarzyna Antosz iD

Materials · 22.03.2024 · 17 (7) · 1456

DOI: 10.3390/ma17071456 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.03.2024. Verfasst von Przemysław Podulka und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, 35-959 Rzeszow, Poland. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VIA CARPATIA Universities of Technology Network named after the President of the Republic of Poland Lech Kaczyński.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Manufacturing processes in industry applications are often controlled by the evaluation of surface topography. Topography, in its overall performance, includes form, waviness, and roughness. Methods of measurement of surface roughness can be roughly divided into tactile and contactless techniques. The latter ones are much faster but sensitive to external disturbances from the environment. One type of external source error, while the measurement of surface topography occurs, is a high-frequency noise. This noise originates from the vibration of the measuring system. In this study, the methods for reducing high-frequency errors from the results of contactless roughness measurements of turned surfaces were supported by machine learning methods. This research delves into optimizing filtration methods for surface topography measurements through the application of machine learning models, focusing on enhancing the accuracy of surface roughness assessments. By examining turned surfaces under specific machining conditions and employing a variety of digital filters, the study identifies the Gaussian regression filter and spline filter as the most effective methods at a 22.5 µm cut-off. Utilizing neural networks, support vector machines, and decision trees, the research demonstrates the superior performance of SVMs, achieving remarkable accuracy and sensitivity in predicting optimal filtration methods.

Schlagwörter

Stichwörter der Autor:innen

SVMartificial neural networkdecision treeshigh-frequency errorsmachiningmeasurement noiseroughnesssurface topographyturning

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, 35-959 Rzeszow, Poland.
  • Faculty of Management, Lublin University of Technology, 20-618 Lublin, Poland.

ORCID-Profile: Przemysław Podulka, Monika Kulisz, Katarzyna Antosz

Förderung

  • VIA CARPATIA Universities of Technology Network named after the President of the Republic of Poland Lech Kaczyński

Zitieren

APA

Podulka, P., Kulisz, M., & Antosz, K. (2024). Evaluation of High-Frequency Measurement Errors from Turned Surface Topography Data Using Machine Learning Methods. Materials, 17(7), 1456. https://doi.org/10.3390/ma17071456

Vancouver

Podulka P, Kulisz M, Antosz K. Evaluation of High-Frequency Measurement Errors from Turned Surface Topography Data Using Machine Learning Methods. Materials. 2024;17(7):1456. doi:10.3390/ma17071456

BibTeX
@article{Podulka2024,
  author = {Podulka, Przemysław and Kulisz, Monika and Antosz, Katarzyna},
  title = {Evaluation of High-Frequency Measurement Errors from Turned Surface Topography Data Using Machine Learning Methods},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {7},
  pages = {1456},
  doi = {10.3390/ma17071456}
}
Kostenlos starten →