EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling of Charge-to-Breakdown with an Electron Trapping Model for Analysis of Thermal Gate Oxide Failure Mechanism in SiC Power MOSFETs

Jiashu Qian, Limeng Shi, Michael Jin, Monikuntala Bhattacharya, Atsushi Shimbori, Hengyu Yu iD, Shiva Houshmand, Marvin H White, Anant K Agarwal

Materials · 22.03.2024 · 17 (7) · 1455

DOI: 10.3390/ma17071455 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.03.2024. Verfasst von Jiashu Qian und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical & Computer Engineering, The Ohio State University, Columbus, OH 43210, USA. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ford Auto Co..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The failure mechanism of thermal gate oxide in silicon carbide (SiC) power metal oxide semiconductor field effect transistors (MOSFETs), whether it is field-driven breakdown or charge-driven breakdown, has always been a controversial topic. Previous studies have demonstrated that the failure time of thermally grown silicon dioxide (SiO2) on SiC stressed with a constant voltage is indicated as charge driven rather than field driven through the observation of Weibull Slope β. Considering the importance of the accurate failure mechanism for the thermal gate oxide lifetime prediction model of time-dependent dielectric breakdown (TDDB), charge-driven breakdown needs to be further fundamentally justified. In this work, the charge-to-breakdown (QBD) of the thermal gate oxide in a type of commercial planar SiC power MOSFETs, under the constant current stress (CCS), constant voltage stress (CVS), and pulsed voltage stress (PVS) are extracted, respectively. A mathematical electron trapping model in thermal SiO2 grown on single crystal silicon (Si) under CCS, which was proposed by M. Liang et al., is proven to work equally well with thermal SiO2 grown on SiC and used to deduce the QBD model of the device under test (DUT). Compared with the QBD obtained under the three stress conditions, the charge-driven breakdown mechanism is validated in the thermal gate oxide of SiC power MOSFETs.

Schlagwörter

Stichwörter der Autor:innen

CCSCVSMOSFETPVSQBDSiCcharge-driven breakdownelectron trapping modelthermal gate oxide

Autor:innen und Institutionen

  • Department of Electrical & Computer Engineering, The Ohio State University, Columbus, OH 43210, USA.
  • Ford Motor Co., Dearborn, MI 48126, USA.

ORCID-Profile: Hengyu Yu

Förderung

  • Ford Auto Co.

Zitieren

APA

Qian, J., Shi, L., Jin, M., Bhattacharya, M., Shimbori, A., Yu, H., Houshmand, S., White, M. H., & Agarwal, A. K. (2024). Modeling of Charge-to-Breakdown with an Electron Trapping Model for Analysis of Thermal Gate Oxide Failure Mechanism in SiC Power MOSFETs. Materials, 17(7), 1455. https://doi.org/10.3390/ma17071455

Vancouver

Qian J, Shi L, Jin M, Bhattacharya M, Shimbori A, Yu H, et al. Modeling of Charge-to-Breakdown with an Electron Trapping Model for Analysis of Thermal Gate Oxide Failure Mechanism in SiC Power MOSFETs. Materials. 2024;17(7):1455. doi:10.3390/ma17071455

BibTeX
@article{Qian2024,
  author = {Qian, Jiashu and Shi, Limeng and Jin, Michael and Bhattacharya, Monikuntala and Shimbori, Atsushi and Yu, Hengyu and Houshmand, Shiva and White, Marvin H and Agarwal, Anant K},
  title = {Modeling of Charge-to-Breakdown with an Electron Trapping Model for Analysis of Thermal Gate Oxide Failure Mechanism in SiC Power MOSFETs},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {7},
  pages = {1455},
  doi = {10.3390/ma17071455}
}
Kostenlos starten →