EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Foaming and Physico-Mechanical Properties of Geopolymer Pastes Manufactured from Post-Metallurgical Recycled Slag

Mateusz Sitarz iD, Tomasz Zdeb, Katarzyna Mróz iD, Izabela Hager iD, Kinga Setlak iD

Materials · 21.03.2024 · 17 (6) · 1449

DOI: 10.3390/ma17061449 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.03.2024. Verfasst von Mateusz Sitarz und 4 weiteren Autor:innen. Beteiligte Einrichtung: Chair of Building Materials, Faculty of Civil Engineering, Cracow University of Technology, 31-155 Cracow, Poland. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Centre for Research and Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a research program aimed towards developing a method of producing lightweight, porous geopolymer composites for the construction industry based on industrial wastes. A direct method involving the addition of chemicals is currently most commonly used to produce the porous mineral structure of a geopolymer matrix. This relies on a reaction in a highly alkaline environment of the geopolymer to produce a gas (usually hydrogen or oxygen) that forms vesicles and creates a network of pores. This paper demonstrates the feasibility of producing a slag-based geopolymer paste foamed with aluminum powder, taking into account different parameters of fresh paste production: the mixing duration, its speed and the timing of foaming agent addition. The foaming process of the fresh paste in terms of the volumetric changes and temperature development of the fresh paste during the curing of the material are observed. After hardening, the physical properties (density and porosity) as well as the mechanical parameters (compressive strength and work of damage) are determined for the nine manufactured foamed pastes. Image analysis software was used to assess the porosity distribution of the material across the cross-section of the samples. The results enabled the design of the mixing procedure to be adopted during the manufacture of such composites.

Schlagwörter

Stichwörter der Autor:innen

foamed geopolymerindustry wastepastepore size distributionporous materialsstereologywork of damage

Autor:innen und Institutionen

  • Chair of Building Materials, Faculty of Civil Engineering, Cracow University of Technology, 31-155 Cracow, Poland.
  • Department of Materials Engineering, Faculty of Materials Science and Physics, Cracow University of Technology, 31-864 Cracow, Poland.

ORCID-Profile: Mateusz Sitarz, Katarzyna Mróz, Izabela Hager, Kinga Setlak

Förderung

  • National Centre for Research and Development

Zitieren

APA

Sitarz, M., Zdeb, T., Mróz, K., Hager, I., & Setlak, K. (2024). Foaming and Physico-Mechanical Properties of Geopolymer Pastes Manufactured from Post-Metallurgical Recycled Slag. Materials, 17(6), 1449. https://doi.org/10.3390/ma17061449

Vancouver

Sitarz M, Zdeb T, Mróz K, Hager I, Setlak K. Foaming and Physico-Mechanical Properties of Geopolymer Pastes Manufactured from Post-Metallurgical Recycled Slag. Materials. 2024;17(6):1449. doi:10.3390/ma17061449

BibTeX
@article{Sitarz2024,
  author = {Sitarz, Mateusz and Zdeb, Tomasz and Mróz, Katarzyna and Hager, Izabela and Setlak, Kinga},
  title = {Foaming and Physico-Mechanical Properties of Geopolymer Pastes Manufactured from Post-Metallurgical Recycled Slag},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {6},
  pages = {1449},
  doi = {10.3390/ma17061449}
}
Kostenlos starten →