EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Using the Spark Plasma Sintering System for Fabrication of Advanced Semiconductor Materials

Kamil Kaszyca iD, Marcin Chmielewski iD, Bartosz Bucholc iD, Piotr Błyskun iD, Fatima Nisar iD, Jerzy Rojek iD, Rafał Zybała iD

Materials · 20.03.2024 · 17 (6) · 1422

DOI: 10.3390/ma17061422 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.03.2024. Verfasst von Kamil Kaszyca und 6 weiteren Autor:innen. Beteiligte Einrichtung: Lukasiewicz Research Network, Institute of Microelectronics and Photonics, al. Lotnikow 32/46, 02-668 Warsaw, Poland. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Center, Ministry of Science, National Science Center, Poland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The interest in the Spark Plasma Sintering (SPS) technique has continuously increased over the last few years. This article shows the possibility of the development of an SPS device used for material processing and synthesis in both scientific and industrial applications and aims to present manufacturing methods and the versatility of an SPS device, presenting examples of processing Arc-Melted- (half-Heusler, cobalt triantimonide) and Self-propagating High-temperature Synthesis (SHS)-synthesized semiconductor (bismuth telluride) materials. The SPS system functionality development is presented, the purpose of which was to broaden the knowledge of the nature of SPS processes. This approach enabled the precise design of material sintering processes and also contributed to increasing the repeatability and accuracy of sintering conditions.

Schlagwörter

Stichwörter der Autor:innen

SHSSPSarc meltingbismuth telluridecobalt triantimonidehalf-Heuslersemiconductor materialsspark plasma sintering

Autor:innen und Institutionen

  • Lukasiewicz Research Network, Institute of Microelectronics and Photonics, al. Lotnikow 32/46, 02-668 Warsaw, Poland.
  • Institute of Fundamental Technological Research, Polish Academy of Sciences, Pawinskiego 5B, 02-106 Warsaw, Poland.
  • Faculty of Materials Science and Engineering, Warsaw University of Technology, Woloska 141, 02-507 Warsaw, Poland.

ORCID-Profile: Kamil Kaszyca, Marcin Chmielewski, Bartosz Bucholc, Piotr Błyskun, Fatima Nisar, Jerzy Rojek, Rafał Zybała

Förderung

  • National Science Center
  • Ministry of Science
  • National Science Center, Poland
  • Polish Ministry of Science
  • Lukasiewicz Research Network

Zitieren

APA

Kaszyca, K., Chmielewski, M., Bucholc, B., Błyskun, P., Nisar, F., Rojek, J., & Zybała, R. (2024). Using the Spark Plasma Sintering System for Fabrication of Advanced Semiconductor Materials. Materials, 17(6), 1422. https://doi.org/10.3390/ma17061422

Vancouver

Kaszyca K, Chmielewski M, Bucholc B, Błyskun P, Nisar F, Rojek J, et al. Using the Spark Plasma Sintering System for Fabrication of Advanced Semiconductor Materials. Materials. 2024;17(6):1422. doi:10.3390/ma17061422

BibTeX
@article{Kaszyca2024,
  author = {Kaszyca, Kamil and Chmielewski, Marcin and Bucholc, Bartosz and Błyskun, Piotr and Nisar, Fatima and Rojek, Jerzy and Zybała, Rafał},
  title = {Using the Spark Plasma Sintering System for Fabrication of Advanced Semiconductor Materials},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {6},
  pages = {1422},
  doi = {10.3390/ma17061422}
}
Kostenlos starten →