Development of a Polyethylene Glycol/Polymethyl Methacrylate-Based Binder System for a Borosilicate Glass Filler Suitable for Injection Molding
Materials · 19.03.2024 · 17 (6) · 1396
DOI: 10.3390/ma17061396 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 19.03.2024. Verfasst von Martin Zürn und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Applied Materials, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Research Foundation (DFG).
Abstract (Originalsprache)
Powder injection molding is an established, cost effective and often near-net-shape mass production process for metal or ceramic parts with complex geometries. This paper deals with the extension of the powder injection molding process chain towards the usage of a commercially available borosilicate glass and the realization of glass compounds with huge densities. The whole process chain consists of the individual steps of compounding, molding, debinding, and sintering. The first part, namely, the search for a suitable feedstock composition with a very high solid load and reliable molding properties, is mandatory for the successful manufacture of a dense glass part. The most prominent feature is the binder composition and the related comprehensive rheological characterization. In this work, a binder system consisting of polyethylene glycol and polymethylmethacrylate with stearic acid as a surfactant was selected and its suitability for glass injection molding was evaluated. The influence of all feedstock components on processing and of the process steps on the final sintered part was investigated for sintered glass parts with densities around 99% of the theoretical value.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Applied Materials, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany.
- Department of Microsystems Engineering, University of Freiburg, Georges-Köhler-Allee 102, 79110 Freiburg, Germany.
ORCID-Profile: Steffen Antusch, Thomas Hanemann
Förderung
- German Research Foundation (DFG)
Zitieren
APA
Zürn, M., Schrage, A., Antusch, S., Bohn, N., Holzer, P., & Hanemann, T. (2024). Development of a Polyethylene Glycol/Polymethyl Methacrylate-Based Binder System for a Borosilicate Glass Filler Suitable for Injection Molding. Materials, 17(6), 1396. https://doi.org/10.3390/ma17061396
Vancouver
Zürn M, Schrage A, Antusch S, Bohn N, Holzer P, Hanemann T. Development of a Polyethylene Glycol/Polymethyl Methacrylate-Based Binder System for a Borosilicate Glass Filler Suitable for Injection Molding. Materials. 2024;17(6):1396. doi:10.3390/ma17061396
BibTeX
@article{Zrn2024,
author = {Zürn, Martin and Schrage, Annika and Antusch, Steffen and Bohn, Nicole and Holzer, Peter and Hanemann, Thomas},
title = {Development of a Polyethylene Glycol/Polymethyl Methacrylate-Based Binder System for a Borosilicate Glass Filler Suitable for Injection Molding},
journal = {Materials},
year = {2024},
volume = {17},
number = {6},
pages = {1396},
doi = {10.3390/ma17061396}
}
EUVIMED