Advanced Solid Geopolymer Formulations for Refractory Applications
Materials · 18.03.2024 · 17 (6) · 1386
DOI: 10.3390/ma17061386 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 18.03.2024. Verfasst von Shaik Hussain und 5 weiteren Autor:innen. Beteiligte Einrichtung: Trenchless Technology Center, Louisiana Tech University, Ruston, LA 71272, USA. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Cement, as a construction material, has low thermal resistance, inherent fire resistance, and is incombustible up to a certain degree. However, the loss of its mechanical performance and spalling are its primary issues, and it thus cannot retain its performance in refractory applications. The present study explores the performance of geopolymer formulations that have excellent fire resistance properties for potential refractory applications. This study is unique, as it investigates advanced solid geopolymer formulations that need only water to activate and bind. Various solid geopolymer formulations with fly ash as a precursor; potassium hydroxide and potassium silicate as activators; and mullite and alumina as refractory aggregates were studied for their compressive strength at up to 1100 °C and compared with their two-part conventional liquid alkaline geopolymer counterparts. Advanced solid geopolymer formulations with mullite and alumina as refractory aggregates had mechanical strength values of 84 MPa and 64 MPa post-1100 °C exposure and were further exposed to ten thermal cycles of 1100 °C to study their fatigue resistance and post-exposure compressive strengths. The geopolymer sample with mullite as a refractory aggregate yielded 115.2 MPa compressive strength after the fourth cycle of exposure. This sample was also studied for its temperature distribution upon direct flame exposure. All the geopolymer formulations displayed a drop in compressive strength at 600 °C due to viscous sintering and then a rise in strength at 1100 °C due to phase transformation. X-ray diffraction studies revealed that the formation of crystalline phases such as leucite, sanidine, and annite were responsible for the superior strengths at 1100 °C for the alumina- and mullite-based geopolymer formulations.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Trenchless Technology Center, Louisiana Tech University, Ruston, LA 71272, USA.
- Civil Engineering & Construction Engineering Technology, Louisiana Tech University, Ruston, LA 71272, USA.
ORCID-Profile: Shaik Hussain
Zitieren
APA
Hussain, S., Amritphale, S., Matthews, J., Paul, N., Matthews, E., & Edwards, R. (2024). Advanced Solid Geopolymer Formulations for Refractory Applications. Materials, 17(6), 1386. https://doi.org/10.3390/ma17061386
Vancouver
Hussain S, Amritphale S, Matthews J, Paul N, Matthews E, Edwards R. Advanced Solid Geopolymer Formulations for Refractory Applications. Materials. 2024;17(6):1386. doi:10.3390/ma17061386
BibTeX
@article{Hussain2024,
author = {Hussain, Shaik and Amritphale, Sudhir and Matthews, John and Paul, Niloy and Matthews, Elizabeth and Edwards, Richard},
title = {Advanced Solid Geopolymer Formulations for Refractory Applications},
journal = {Materials},
year = {2024},
volume = {17},
number = {6},
pages = {1386},
doi = {10.3390/ma17061386}
}
EUVIMED