EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lattice Rotation and Deformation Mechanisms under Tensile Loading in a Single-Crystal Superalloy with [001] Misorientation

Xiangyu Gao, Zheng Zhang, Liyu Liu, Chunhu Tao

Materials · 16.03.2024 · 17 (6) · 1368

DOI: 10.3390/ma17061368 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.03.2024. Verfasst von Xiangyu Gao und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Beihang University (BUAA), Beijing 100191, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Major Project of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates how deviation angles close to the [001] orientation affect the tensile properties and deformation behavior of a nickel-based single-crystal superalloy at room temperature. The research focuses on samples with deviation angles of 3°, 8°, and 13° from the [001] orientation and examines their strength and ductility. We employed scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM) to explore the deformation micro-mechanisms at varying angles. Findings reveal that strength decreases and ductility increases as the deviation angle widens within the [001] vicinity. The study emphasizes that octahedral slip-driven crystal slip and rotation are crucial for understanding tensile deformation. The deformation differences in samples at varying angles are attributed to the differential engagement of mechanisms. Specifically, at lower angles, reduced ductility and increased strength are due to short lattice rotation paths and work hardening causing superlattice stacking faults (SSFs) to slip in two directions on the {111} plane within the γ′ phase. As the angles increase, the lattice rotation paths extend, and Shockley partial dislocations (a/6) accumulate in γ channels. This process, involving SSFs moving in a single direction within the γ′ phase, results in higher ductility and reduced strength.

Schlagwörter

Stichwörter der Autor:innen

deformation mechanismlattice rotationmisorientationsingle-crystal superalloy

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Beihang University (BUAA), Beijing 100191, China.
  • AECC Beijing Institute of Aeronautical Materials, Beijing 100095, China.
  • AVIC Failure Analysis Center, Beijing 100095, China.
  • Key Laboratory of Aeronautical Materials Testing and Evaluation, Aero Engine Corporation of China, Beijing 100095, China.
  • Beijing Key Laboratory of Aeronautical Materials Testing and Evaluation, Beijing 100095, China.

Förderung

  • National Science and Technology Major Project of China

Zitieren

APA

Gao, X., Zhang, Z., Liu, L., & Tao, C. (2024). Lattice Rotation and Deformation Mechanisms under Tensile Loading in a Single-Crystal Superalloy with [001] Misorientation. Materials, 17(6), 1368. https://doi.org/10.3390/ma17061368

Vancouver

Gao X, Zhang Z, Liu L, Tao C. Lattice Rotation and Deformation Mechanisms under Tensile Loading in a Single-Crystal Superalloy with [001] Misorientation. Materials. 2024;17(6):1368. doi:10.3390/ma17061368

BibTeX
@article{Gao2024,
  author = {Gao, Xiangyu and Zhang, Zheng and Liu, Liyu and Tao, Chunhu},
  title = {Lattice Rotation and Deformation Mechanisms under Tensile Loading in a Single-Crystal Superalloy with [001] Misorientation},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {6},
  pages = {1368},
  doi = {10.3390/ma17061368}
}
Kostenlos starten →