EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modal Response Improvement of Periodic Lattice Materials with a Shear Modulus-Based FE Homogenized Model

Tianheng Luo iD, Lizhe Wang iD, Fuyuan Liu, Min Chen iD, Ji Li iD

Materials · 12.03.2024 · 17 (6) · 1314

DOI: 10.3390/ma17061314 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.03.2024. Verfasst von Tianheng Luo und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Advanced Technology, Xi'an Jiaotong-Liverpool University, Suzhou 210053, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, XJTLU Research Development Fund, XJTLU Research Development Fund for their support.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lattice materials are widely used in industries due to their designable capabilities of specific stiffness and energy absorption. However, evaluating the mechanical response of macroscopic lattice structures can be computationally expensive. Homogenization-based multi-scale analysis offers an efficient approach to address this issue. To achieve a simpler, while precise, homogenization, the authors proposed an equidistant segmentation (ES) method for the measurement of the effective shear modulus. In this method, the periodic boundary conditions (PBCs) are approximated by constraining the lateral displacement of nodes between parallel layers of periodic cells. The validations were applied to three typical lattice topologies: body-centered cubic (BCC) lattices, gyroid-, and primitive-triply periodic minimal surface (TPMS) lattices, to predict and compare their anti-vibration capacities. The results demonstrated the rationality and the promising precision of the multi-scale-based equivalent modal analysis through the proposed method and that it eliminated the geometric limitation of lattices with diverse frameworks. Overall, a higher anti-vibration capacity of TPMS was observed. In the study, the authors examined the influence of the relative densities on the balance between the anti-vibration capacity and loading capacity (per unit mass) of the TPMS topologies. Specifically, the unit mass of the TPMS with lower relative densities was able to resist higher frequencies, and the structures were dominated by the anti-vibration capacity. In contrast, a higher relative density is better when emphasizing the loading capacity. These findings may provide notable references to the designers and inform the selection of lattice materials for various industrial applications.

Schlagwörter

Stichwörter der Autor:innen

anti-vibration capacityfinite element method (FEM)homogenization modelinglattice structuremodal analysisperiodic boundary conditions (PBCs)

Autor:innen und Institutionen

  • School of Advanced Technology, Xi'an Jiaotong-Liverpool University, Suzhou 210053, China.
  • Institute of Orthopaedics & Musculoskeletal Science, Division of Surgery & Interventional Science, University College London, Royal National Orthopaedic Hospital, Stanmore, London HA7 4LP, UK.
  • School of Engineering, University of Liverpool, Liverpool L69 3BX, UK.
  • Key Laboratory of MEMS of the Ministry of Education, Southeast University, Nanjing 210096, China.

ORCID-Profile: Tianheng Luo, Lizhe Wang, Min Chen, Ji Li

Förderung

  • National Natural Science Foundation of China
  • XJTLU Research Development Fund
  • XJTLU Research Development Fund for their support

Zitieren

APA

Luo, T., Wang, L., Liu, F., Chen, M., & Li, J. (2024). Modal Response Improvement of Periodic Lattice Materials with a Shear Modulus-Based FE Homogenized Model. Materials, 17(6), 1314. https://doi.org/10.3390/ma17061314

Vancouver

Luo T, Wang L, Liu F, Chen M, Li J. Modal Response Improvement of Periodic Lattice Materials with a Shear Modulus-Based FE Homogenized Model. Materials. 2024;17(6):1314. doi:10.3390/ma17061314

BibTeX
@article{Luo2024,
  author = {Luo, Tianheng and Wang, Lizhe and Liu, Fuyuan and Chen, Min and Li, Ji},
  title = {Modal Response Improvement of Periodic Lattice Materials with a Shear Modulus-Based FE Homogenized Model},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {6},
  pages = {1314},
  doi = {10.3390/ma17061314}
}
Kostenlos starten →