EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Study on the Wind Erosion Resistance of Aeolian Sand Solidified by Microbially Induced Calcite Precipitation (MICP)

Jing Qu, Gang Li, Bin Ma, Jia Liu iD, Jinli Zhang iD, Xing Liu, Yijia Zhang

Materials · 09.03.2024 · 17 (6) · 1270

DOI: 10.3390/ma17061270 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.03.2024. Verfasst von Jing Qu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Shaanxi Key Laboratory of Safety and Durability of Concrete Structures, Xijing University, Xi'an 710123, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Basic Research Program of Shaanxi Province, Scientific Research Program Funded by Education Department of Shaanxi Provincial Government.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microbially induced calcite precipitation (MICP) is an emerging solidification method characterized by high economic efficiency, environmental friendliness, and durability. This study validated the reliability of the MICP sand solidification method by conducting a small-scale wind tunnel model test using aeolian sand solidified by MICP and analyzing the effects of wind velocity (7 m/s, 10 m/s, and 13 m/s), deflation angle (0°, 15°, 30°, and 45°), wind erosion cycle (1, 3, and 5), and other related factors on the mass loss rate of solidified aeolian sand. The microstructure of aeolian sand was constructed by performing mesoscopic and microscopic testing based on X-ray diffraction analysis (XRD), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). According to the test results, the mass loss rate of solidified aeolian sand gradually increases with the increase in wind velocity, deflation angle, and wind erosion cycle. When the wind velocity was 13 m/s, the mass loss rate of the aeolian sand was only 63.6%, indicating that aeolian sand has excellent wind erosion resistance. CaCO3 crystals generated by MICP were mostly distributed on sand particle surfaces, in sand particle pores, and between sand particles to realize the covering, filling, and cementing effects.

Schlagwörter

Stichwörter der Autor:innen

MICPaeolian sandmodel testsolidified mechanismwind erosion resistance

Autor:innen und Institutionen

  • Shaanxi Key Laboratory of Safety and Durability of Concrete Structures, Xijing University, Xi'an 710123, China.
  • State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Dalian 116024, China.

ORCID-Profile: Jia Liu, Jinli Zhang

Förderung

  • Natural Science Basic Research Program of Shaanxi Province
  • Scientific Research Program Funded by Education Department of Shaanxi Provincial Government

Zitieren

APA

Qu, J., Li, G., Ma, B., Liu, J., Zhang, J., Liu, X., & Zhang, Y. (2024). Experimental Study on the Wind Erosion Resistance of Aeolian Sand Solidified by Microbially Induced Calcite Precipitation (MICP). Materials, 17(6), 1270. https://doi.org/10.3390/ma17061270

Vancouver

Qu J, Li G, Ma B, Liu J, Zhang J, Liu X, et al. Experimental Study on the Wind Erosion Resistance of Aeolian Sand Solidified by Microbially Induced Calcite Precipitation (MICP). Materials. 2024;17(6):1270. doi:10.3390/ma17061270

BibTeX
@article{Qu2024,
  author = {Qu, Jing and Li, Gang and Ma, Bin and Liu, Jia and Zhang, Jinli and Liu, Xing and Zhang, Yijia},
  title = {Experimental Study on the Wind Erosion Resistance of Aeolian Sand Solidified by Microbially Induced Calcite Precipitation (MICP)},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {6},
  pages = {1270},
  doi = {10.3390/ma17061270}
}
Kostenlos starten →