EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Suppressed Plastic Anisotropy via Sigma-Phase Precipitation in CoCrFeMnNi High-Entropy Alloys

Tae Hyeong Kim, Jaimyun Jung, Jae Wung Bae iD

Materials · 08.03.2024 · 17 (6) · 1265

DOI: 10.3390/ma17061265 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.03.2024. Verfasst von Tae Hyeong Kim und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Metallurgical Engineering, Pukyong National University, Busan 48513, Republic of Korea. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korea Institute for Advancement of Technology, Korea government (MSIP).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of sigma-phase precipitation on plastic anisotropy of the equiatomic CoCrFeMnNi high-entropy alloy was investigated. Annealing at 700 °C after cold-rolling leads to the formation of the Cr-rich σ phase with a fraction of 2.7%. It is experimentally found that the planar anisotropy (∆r = −0.16) of the CoCrFeMnNi alloy annealed at 700 °C is two times lower than that of the alloy annealed at 800 °C (∆r = −0.35). This observation was further supported by measuring the earing profile of cup specimens after the deep drawing process. The plastic strain ratio, normal anisotropy, and planar anisotropy were also predicted using the visco-plastic self-consistent model. The results indirectly indicated that the reduction of plastic anisotropy in alloy annealed at 700 °C can be attributed to the formation of the σ phase.

Schlagwörter

Stichwörter der Autor:innen

high-entropy alloysplastic anisotropyprecipitatesvisco-plastic self-consistent model

Autor:innen und Institutionen

  • Department of Metallurgical Engineering, Pukyong National University, Busan 48513, Republic of Korea.
  • Department of Materials AI & Big-Data, Korea Institute of Materials Science (KIMS), Changwon 51508, Republic of Korea.

ORCID-Profile: Jae Wung Bae

Förderung

  • National Research Foundation of Korea
  • Korea Institute for Advancement of Technology
  • Korea government (MSIP)
  • Ministry of Trade, Industry and Energy (MOTIE)

Zitieren

APA

Kim, T. H., Jung, J., & Bae, J. W. (2024). Suppressed Plastic Anisotropy via Sigma-Phase Precipitation in CoCrFeMnNi High-Entropy Alloys. Materials, 17(6), 1265. https://doi.org/10.3390/ma17061265

Vancouver

Kim TH, Jung J, Bae JW. Suppressed Plastic Anisotropy via Sigma-Phase Precipitation in CoCrFeMnNi High-Entropy Alloys. Materials. 2024;17(6):1265. doi:10.3390/ma17061265

BibTeX
@article{Kim2024,
  author = {Kim, Tae Hyeong and Jung, Jaimyun and Bae, Jae Wung},
  title = {Suppressed Plastic Anisotropy via Sigma-Phase Precipitation in CoCrFeMnNi High-Entropy Alloys},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {6},
  pages = {1265},
  doi = {10.3390/ma17061265}
}
Kostenlos starten →