Influence of Accelerators on Cement Mortars Using Fluid Catalytic Cracking Catalyst Residue (FCC): Enhanced Mechanical Properties at Early Curing Ages
Materials · 06.03.2024 · 17 (5) · 1219
DOI: 10.3390/ma17051219 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 06.03.2024. Verfasst von Lourdes Soriano und 5 weiteren Autor:innen. Beteiligte Einrichtung: Giquima-Research Group of Building Materials Chemistry, Instituto Universitario de Investigación de Ciencia y Tecnología del Hormigón ICITECH, Univer…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Estatal de Investigación, Spanish Ministry of Universities.
Abstract (Originalsprache)
Supplementary cementitious materials (SCMs) have been used in the construction industry to mainly reduce the greenhouse gas emissions associated with Portland cement. Of SCMs, the petrochemical industry waste known as fluid catalytic cracking catalyst residue (FCC) is recognized for its high reactivity. Nevertheless, the binders produced using SCMs usually present low mechanical strength at early curing ages. This study aims to assess the effect of different accelerating additives (KOH, sodium silicate SIL, commercial additive SKR) on the mechanical strength of mortars containing FCC. The results show that after only 8 curing hours, the compressive strength gain of the FCC mortars containing SKR was over 100% compared to the FCC mortar with no additive (26.0 vs. 12.8 MPa). Comparing the compressive strength of FCC mortar containing SKR to the control mortar, the enhancement is spetacular (6.85 vs. 26.03 MPa). The effectiveness of the tested accelerators at 8–24 curing hours was KOH ≈ SIL < SKR, whereas it was KOH < SIL < SKR for 48 h–28 days. The thermogravimetric data confirmed the good compatibility of FCC and the commercial accelerator.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Giquima-Research Group of Building Materials Chemistry, Instituto Universitario de Investigación de Ciencia y Tecnología del Hormigón ICITECH, Universitat Politècnica de València, 46022 Valencia, Spain.
ORCID-Profile: Lourdes Soriano, María Victoria Borrachero, Ester Giménez-Carbo, José María Monzó, Jordi Payá
Förderung
- Agencia Estatal de Investigación
- Spanish Ministry of Universities
Zitieren
APA
Soriano, L., Borrachero, M. V., Giménez-Carbo, E., Tashima, M. M., Monzó, J. M., & Payá, J. (2024). Influence of Accelerators on Cement Mortars Using Fluid Catalytic Cracking Catalyst Residue (FCC): Enhanced Mechanical Properties at Early Curing Ages. Materials, 17(5), 1219. https://doi.org/10.3390/ma17051219
Vancouver
Soriano L, Borrachero MV, Giménez-Carbo E, Tashima MM, Monzó JM, Payá J. Influence of Accelerators on Cement Mortars Using Fluid Catalytic Cracking Catalyst Residue (FCC): Enhanced Mechanical Properties at Early Curing Ages. Materials. 2024;17(5):1219. doi:10.3390/ma17051219
BibTeX
@article{Soriano2024,
author = {Soriano, Lourdes and Borrachero, María Victoria and Giménez-Carbo, Ester and Tashima, Mauro M and Monzó, José María and Payá, Jordi},
title = {Influence of Accelerators on Cement Mortars Using Fluid Catalytic Cracking Catalyst Residue (FCC): Enhanced Mechanical Properties at Early Curing Ages},
journal = {Materials},
year = {2024},
volume = {17},
number = {5},
pages = {1219},
doi = {10.3390/ma17051219}
}
EUVIMED