EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bending Behavior of Hybrid Timber–Steel Beams

Peter Haase iD, Simon Aurand iD, Jakob Boretzki iD, Matthias Albiez, Carmen Sandhaas, Thomas Ummenhofer, Philipp Dietsch iD

Materials · 01.03.2024 · 17 (5) · 1164

DOI: 10.3390/ma17051164 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.03.2024. Verfasst von Peter Haase und 6 weiteren Autor:innen. Beteiligte Einrichtung: Steel and Lightweight Structures, Karlsruhe Institute of Technology, 76131 Karlsruhe, Germany. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry for Economic Affairs and Climate Action, Federal Ministry of Economic Affairs and Climate Action.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Driven by climate change and the need for a more sustainable construction sector, policy is increasingly demanding and promoting timber hybrid construction methods. In the German state of Baden-Württemberg, every new public building has to be of timber or timber hybrid construction (Holzbauoffensive BW). The objective of multi-story buildings with large floor spans can only be achieved in a resource-efficient way by hybrid constructions combining timber and steel components. A research project recently completed at the Karlsruhe Institute of Technology was aimed at the development and systematic investigation of hybrid bending beams in which an advantageous combination of the materials steel and timber is used. For this purpose, steel profiles are integrated into timber cross-sections in a shear-resistant manner by adhesive bonding. As part of the experimental, numerical and analytical investigations, different cross-sections of steel and timber, as well as different construction materials, were considered (GL24h, LVL48p, LVL80p, S355 and S420). The results of large-scale four-point bending tests illustrate the potential of this new hybrid construction method. Depending on the geometry and material combinations tested, the bending stiffness could be increased by up to 250%, and the load-carrying capacity by up to 120%, compared to a glulam beam with identical dimensions.

Schlagwörter

Stichwörter der Autor:innen

adhesive bondinganalytical calculationsfour-point bendinghybridsteeltimber

Autor:innen und Institutionen

  • Steel and Lightweight Structures, Karlsruhe Institute of Technology, 76131 Karlsruhe, Germany.
  • Timber Structures and Building Construction, Karlsruhe Institute of Technology, 76131 Karlsruhe, Germany.

ORCID-Profile: Peter Haase, Simon Aurand, Jakob Boretzki, Philipp Dietsch

Förderung

  • Federal Ministry for Economic Affairs and Climate Action
  • Federal Ministry of Economic Affairs and Climate Action

Zitieren

APA

Haase, P., Aurand, S., Boretzki, J., Albiez, M., Sandhaas, C., Ummenhofer, T., & Dietsch, P. (2024). Bending Behavior of Hybrid Timber–Steel Beams. Materials, 17(5), 1164. https://doi.org/10.3390/ma17051164

Vancouver

Haase P, Aurand S, Boretzki J, Albiez M, Sandhaas C, Ummenhofer T, et al. Bending Behavior of Hybrid Timber–Steel Beams. Materials. 2024;17(5):1164. doi:10.3390/ma17051164

BibTeX
@article{Haase2024,
  author = {Haase, Peter and Aurand, Simon and Boretzki, Jakob and Albiez, Matthias and Sandhaas, Carmen and Ummenhofer, Thomas and Dietsch, Philipp},
  title = {Bending Behavior of Hybrid Timber–Steel Beams},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {5},
  pages = {1164},
  doi = {10.3390/ma17051164}
}
Kostenlos starten →