EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Fabrication of Ultrahigh-Strength Steel with a Nanolath Structure via Quenching–Partitioning–Tempering

Wenting Xu, Li Xie, Xiaoying Liu, Jiangnan Wang, Yuxuan Xu, Mingtao He, Kejun Hu, Chang Liu, Wei Yu iD

Materials · 01.03.2024 · 17 (5) · 1161

DOI: 10.3390/ma17051161 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.03.2024. Verfasst von Wenting Xu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Engineering, Jiangsu University of Technology, Changzhou 213001, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province, Natural Science Foundation of the Jiangsu Higher Education Institutions of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel low-alloy ultrahigh-strength steel featuring excellent mechanical properties and comprising a nanolath structure was fabricated in this work using a quenching–partitioning–tempering (Q-P-T) process. The Q-P-T process comprised direct quenching and an isothermal bainitic transformation for partitioning after thermo-mechanical control processing (online Q&P) and offline tempering (reheating and tempering). The ultrafine nanolath martensite/bainite mixed structure, combined with residual austenite in the form of a thin film between the nanolaths, was formed, thereby conferring excellent mechanical properties to the steel structures. After the Q-P-T process, the yield and tensile strengths of the steels reached 1450 MPa and 1726 MPa, respectively. Furthermore, the Brinell hardness and elongation rate were 543 HB and 11.5%, respectively, with an average impact energy of 20 J at room temperature.

Schlagwörter

Stichwörter der Autor:innen

mechanical propertymicrostructurequenching–partitioning–tempering (Q-P-T)ultrahigh-strength steel

Autor:innen und Institutionen

  • School of Materials Engineering, Jiangsu University of Technology, Changzhou 213001, China.
  • Beijing Beiye Functional Materials Corporation, Beijing 100192, China.
  • Institute of Engineering Technology, University of Science and Technology Beijing, Beijing 100081, China.

ORCID-Profile: Wei Yu

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Jiangsu Province
  • Natural Science Foundation of the Jiangsu Higher Education Institutions of China

Zitieren

APA

Xu, W., Xie, L., Liu, X., Wang, J., Xu, Y., He, M., Hu, K., Liu, C., & Yu, W. (2024). The Fabrication of Ultrahigh-Strength Steel with a Nanolath Structure via Quenching–Partitioning–Tempering. Materials, 17(5), 1161. https://doi.org/10.3390/ma17051161

Vancouver

Xu W, Xie L, Liu X, Wang J, Xu Y, He M, et al. The Fabrication of Ultrahigh-Strength Steel with a Nanolath Structure via Quenching–Partitioning–Tempering. Materials. 2024;17(5):1161. doi:10.3390/ma17051161

BibTeX
@article{Xu2024,
  author = {Xu, Wenting and Xie, Li and Liu, Xiaoying and Wang, Jiangnan and Xu, Yuxuan and He, Mingtao and Hu, Kejun and Liu, Chang and Yu, Wei},
  title = {The Fabrication of Ultrahigh-Strength Steel with a Nanolath Structure via Quenching–Partitioning–Tempering},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {5},
  pages = {1161},
  doi = {10.3390/ma17051161}
}
Kostenlos starten →