EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrosion of Stainless Steel in Simulated Nuclear Reactor Primary Coolant—Experiments and Modeling

Martin Bojinov iD, Iva Betova, Vasil Karastoyanov, Georgi Avdeev iD

Materials · 01.03.2024 · 17 (5) · 1148

DOI: 10.3390/ma17051148 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.03.2024. Verfasst von Martin Bojinov und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physical Chemistry, University of Chemical Technology and Metallurgy, 1756 Sofia, Bulgaria. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Recovery and Resilience Plan of the Republic of Bulgaria, European Union-NextGenerationEU through the National Recovery and Resilience Plan of the Republic of Bulgaria, National Scientific Infrastructure “Energy Storage and Hydrogen Energy”.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present paper, the effect of the evolution of primary water chemistry during power operation on the corrosion rate and conduction mechanism of oxide films on stainless steel is studied by in situ impedance spectroscopy at 300 °C/9 MPa during 1-week exposure periods in an autoclave connected to a recirculation loop. At the end of the exposure period, the samples were anodically polarized in a wide range of potentials to evaluate the stability of the passive oxide. Separate samples of the same steel were simultaneously exposed to the coolant and subsequently analyzed by glow discharge optical emission spectroscopy (GDOES) in order to estimate the thickness and the in-depth composition of the formed oxides. Impedance data were quantitatively interpreted using the mixed-conduction model for oxide films (MCM) to estimate the rates of metal oxidation at the alloy/oxide interface, oxide dissolution and restructuring at the film/coolant interface, and ion transport in the protective corrosion layer.

Schlagwörter

Stichwörter der Autor:innen

316L stainless steelcorrosion releaseelectrochemical impedance spectroscopymixed-conduction modeloxide growthprimary water chemistry

Autor:innen und Institutionen

  • Department of Physical Chemistry, University of Chemical Technology and Metallurgy, 1756 Sofia, Bulgaria.
  • Institute of Electrochemistry and Energy Systems, Bulgarian Academy of Sciences, 1113 Sofia, Bulgaria.
  • Institute of Physical Chemistry, Bulgarian Academy of Sciences, 1113 Sofia, Bulgaria.

ORCID-Profile: Martin Bojinov, Georgi Avdeev

Förderung

  • National Recovery and Resilience Plan of the Republic of Bulgaria
  • European Union-NextGenerationEU through the National Recovery and Resilience Plan of the Republic of Bulgaria
  • National Scientific Infrastructure “Energy Storage and Hydrogen Energy”

Zitieren

APA

Bojinov, M., Betova, I., Karastoyanov, V., & Avdeev, G. (2024). Corrosion of Stainless Steel in Simulated Nuclear Reactor Primary Coolant—Experiments and Modeling. Materials, 17(5), 1148. https://doi.org/10.3390/ma17051148

Vancouver

Bojinov M, Betova I, Karastoyanov V, Avdeev G. Corrosion of Stainless Steel in Simulated Nuclear Reactor Primary Coolant—Experiments and Modeling. Materials. 2024;17(5):1148. doi:10.3390/ma17051148

BibTeX
@article{Bojinov2024,
  author = {Bojinov, Martin and Betova, Iva and Karastoyanov, Vasil and Avdeev, Georgi},
  title = {Corrosion of Stainless Steel in Simulated Nuclear Reactor Primary Coolant—Experiments and Modeling},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {5},
  pages = {1148},
  doi = {10.3390/ma17051148}
}
Kostenlos starten →