EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of High-Frequency Ultrasonic Vibration Load on Pore-Fracture Structure in Hard Rock: A Study Based on 3D Reconstruction Technology

Jianguo Zhang, Lei Zhang iD, Xufeng Wang, Zhijun Niu, Zhanbiao Yang

Materials · 29.02.2024 · 17 (5) · 1127

DOI: 10.3390/ma17051127 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.02.2024. Verfasst von Jianguo Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Coking Coal Resources Green Exploitation, China Pingmei Shenma Group, Pingdingshan 467000, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key Research and Development Projects of China Pingmei Shenma Group, Six Talent Peaks Project in Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rock fracture is a macroscopic fracturing process resulting from the initiation and propagation of microscopic cracks. Therefore, it is crucial to comprehend the damage and fracture mechanism of rock under ultrasonic vibration by investigating the evolutionary pattern of the meso-pore fracture structure in response to high-frequency vibrational loads, as explored in this study. Standard red sandstone samples with a diameter of 50 mm and height of 100 mm were subjected to ultrasonic high-frequency vibration tests. NMR and CT scans were conducted on the rock samples at different stages of ultrasonic vibration excitation to obtain the corresponding transverse relaxation time (T2) spectra and CT scan images for each layer. The NMR test results revealed that smaller pores formed within the rock under high-frequency vibration loads, with a noticeable expansion observed in micropores. Three-dimensional reconstruction analysis based on two-dimensional CT images demonstrated an increase in pore count by 145.56%, 122.67%, and 98.87%, respectively, for the upper, middle, and lower parts of the rock after 120 s of ultrasonic vibration excitation; furthermore, the maximum pore volume increased by 239.42%, 109.16%, and 18.99%, respectively, for these regions during this period as well. These findings contribute towards a deeper understanding regarding the mechanisms underlying rock fragmentation when exposed to high-frequency vibrational loads.

Schlagwörter

Stichwörter der Autor:innen

CT scanninghigh-frequency vibrationnuclear magnetic resonancethree-dimensional reconstruction

Autor:innen und Institutionen

  • State Key Laboratory of Coking Coal Resources Green Exploitation, China Pingmei Shenma Group, Pingdingshan 467000, China.
  • Jiangsu Engineering Laboratory of Mine Earthquake Monitoring and Prevention, School of Mines, China University of Mining and Technology, Xuzhou 221116, China.

ORCID-Profile: Lei Zhang

Förderung

  • National Natural Science Foundation of China
  • Key Research and Development Projects of China Pingmei Shenma Group
  • Six Talent Peaks Project in Jiangsu Province

Zitieren

APA

Zhang, J., Zhang, L., Wang, X., Niu, Z., & Yang, Z. (2024). Influence of High-Frequency Ultrasonic Vibration Load on Pore-Fracture Structure in Hard Rock: A Study Based on 3D Reconstruction Technology. Materials, 17(5), 1127. https://doi.org/10.3390/ma17051127

Vancouver

Zhang J, Zhang L, Wang X, Niu Z, Yang Z. Influence of High-Frequency Ultrasonic Vibration Load on Pore-Fracture Structure in Hard Rock: A Study Based on 3D Reconstruction Technology. Materials. 2024;17(5):1127. doi:10.3390/ma17051127

BibTeX
@article{Zhang2024,
  author = {Zhang, Jianguo and Zhang, Lei and Wang, Xufeng and Niu, Zhijun and Yang, Zhanbiao},
  title = {Influence of High-Frequency Ultrasonic Vibration Load on Pore-Fracture Structure in Hard Rock: A Study Based on 3D Reconstruction Technology},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {5},
  pages = {1127},
  doi = {10.3390/ma17051127}
}
Kostenlos starten →