EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Using Cu2O/ZnO as Two-Dimensional Hole/Electron Transport Nanolayers in Unleaded FASnI3 Perovskite Solar Cells

Masood Mehrabian, Maryam Taleb-Abbasi, Omid Akhavan iD

Materials · 26.02.2024 · 17 (5) · 1064

DOI: 10.3390/ma17051064 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.02.2024. Verfasst von Masood Mehrabian und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Faculty of Basic Science, University of Maragheh, Maragheh P.O. Box 55181-83111, Iran. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A Pb-free FASnI3 perovskite solar cell improved by using Cu2O/ZnO as two-dimensional-based hole/electron transport nanolayers has been proposed and studied by using a SCAPS-1D solar simulator. To calibrate our study, at first, an FTO/ZnO/MAPbI3/Cu2O/Au multilayer device was simulated, and the numerical results (including a conversion efficiency of 6.06%, an open circuit potential of 0.76 V, a fill factor parameter of 64.91%, and a short circuit electric current density of 12.26 mA/cm2) were compared with the experimental results in the literature. Then, the conversion efficiency of the proposed FASnI3-based solar cell was found to improve to 7.83%. The depth profile energy levels, charge carrier concentrations, recombination rate of electron/hole pair, and the FASnI3 thickness-dependent solar cell efficiency were studied and compared with the results obtained for the MAPbI3-containing device (as a benchmark). Interestingly, the FASnI3 material required to obtain an optimized solar cell is one-half of the material required for an optimized MAPbI3-based device, with a thickness of 200 nm. These results indicate that developing more environmentally friendly perovskite solar cells is possible if suitable electron/hole transport layers are selected along with the upcoming Pb-free perovskite absorber layers.

Schlagwörter

Stichwörter der Autor:innen

Pb-free solar cellsSCAPS-1D solar simulatorcopper oxideformamidinium Sn-based perovskitesnanomaterialszinc oxide

Autor:innen und Institutionen

  • Department of Physics, Faculty of Basic Science, University of Maragheh, Maragheh P.O. Box 55181-83111, Iran.
  • Department of Physical Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz P.O. Box 51666-16471, Iran.
  • Department of Physics, Sharif University of Technology, Tehran P.O. Box 11155-9161, Iran.

ORCID-Profile: Omid Akhavan

Zitieren

APA

Mehrabian, M., Taleb-Abbasi, M., & Akhavan, O. (2024). Using Cu2O/ZnO as Two-Dimensional Hole/Electron Transport Nanolayers in Unleaded FASnI3 Perovskite Solar Cells. Materials, 17(5), 1064. https://doi.org/10.3390/ma17051064

Vancouver

Mehrabian M, Taleb-Abbasi M, Akhavan O. Using Cu2O/ZnO as Two-Dimensional Hole/Electron Transport Nanolayers in Unleaded FASnI3 Perovskite Solar Cells. Materials. 2024;17(5):1064. doi:10.3390/ma17051064

BibTeX
@article{Mehrabian2024,
  author = {Mehrabian, Masood and Taleb-Abbasi, Maryam and Akhavan, Omid},
  title = {Using Cu2O/ZnO as Two-Dimensional Hole/Electron Transport Nanolayers in Unleaded FASnI3 Perovskite Solar Cells},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {5},
  pages = {1064},
  doi = {10.3390/ma17051064}
}
Kostenlos starten →