EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evolution of Microstructure and Mechanical Properties of Ti-6Al-4V Alloy under Heat Treatment and Multi-Axial Forging

Sijie Du, Yang Song, Yiting He, Chunhua Wei, Rongyou Chen, Shubo Guo, Wei Liang, Shengyuan Lei, Xiaohong Liu

Materials · 25.02.2024 · 17 (5) · 1060

DOI: 10.3390/ma17051060 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.02.2024. Verfasst von Sijie Du und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangxi Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The mechanical properties of various Ti-6Al-4V alloys are influenced by their respective microstructures. This study generated an ultrafine-grain (UFG) Ti-6Al-4V alloy featuring bimodal grain distribution characteristics achieved through initial heat treatment, multi-axial forging (MF), and annealing. The study also extensively examined the evolution process of the alloy’s microstructure. By subjecting the materials to heat treatments at 900 °C with air cooling and 950 °C with air cooling, both materials were found to be consisted of primary α (αp) and transformed β (αs+β) regions with different proportions. Following MF, the sample treated at 900 °C displays a microstructure featuring UFGs of α+β surrounding larger micron-sized αp grains. On the other hand, the sample treated at 950 °C displays a microstructure distinguished by twisted αs lamellar and fragmented β grains surrounding larger micron-sized αp grains. Following annealing, no significant grain growth was observed in the sample. The geometrically necessary dislocations (GNDs) within the UFGs were eliminated, though some GNDs persisted within the αp grains. The samples undergoing the 900 °C heat treatment, MF, and subsequent annealing exhibited elevated strength (1280 MPa) and total elongation (10.7%). This investigation introduces a novel method for designing the microstructure of the Ti-6Al-4V alloy to achieve superior performance.

Schlagwörter

Stichwörter der Autor:innen

Ti-6Al-4V alloysbimodal structureheat treatmentmechanical propertiesmulti-axial forgingultrafine-grain

Autor:innen und Institutionen

  • School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China.
  • State Key Laboratory of Featured Metal Materials and Life-Cycle Safety for Composite Structures, Guangxi University, Nanning 530004, China.

Förderung

  • National Natural Science Foundation of China
  • Guangxi Natural Science Foundation

Zitieren

APA

Du, S., Song, Y., He, Y., Wei, C., Chen, R., Guo, S., Liang, W., Lei, S., & Liu, X. (2024). Evolution of Microstructure and Mechanical Properties of Ti-6Al-4V Alloy under Heat Treatment and Multi-Axial Forging. Materials, 17(5), 1060. https://doi.org/10.3390/ma17051060

Vancouver

Du S, Song Y, He Y, Wei C, Chen R, Guo S, et al. Evolution of Microstructure and Mechanical Properties of Ti-6Al-4V Alloy under Heat Treatment and Multi-Axial Forging. Materials. 2024;17(5):1060. doi:10.3390/ma17051060

BibTeX
@article{Du2024,
  author = {Du, Sijie and Song, Yang and He, Yiting and Wei, Chunhua and Chen, Rongyou and Guo, Shubo and Liang, Wei and Lei, Shengyuan and Liu, Xiaohong},
  title = {Evolution of Microstructure and Mechanical Properties of Ti-6Al-4V Alloy under Heat Treatment and Multi-Axial Forging},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {5},
  pages = {1060},
  doi = {10.3390/ma17051060}
}
Kostenlos starten →