EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Properties of Eco-Friendly Earthen Materials Stabilized with Bio-Based Polymers: Experimental Data and Modeling Procedure for Improving Mix-Design

Marta Cappai iD, Rizwan Shoukat, Luca Pilia iD, Roberto Ricciu iD, Daniele Lai, Gianluca Marongiu, Giorgio Pia iD

Materials · 23.02.2024 · 17 (5) · 1035

DOI: 10.3390/ma17051035 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.02.2024. Verfasst von Marta Cappai und 6 weiteren Autor:innen. Beteiligte Einrichtung: Dipartimento di Ingegneria Meccanica, Chimica e dei Materiali, Università degli Studi di Cagliari, Via Marengo 2, 09123 Cagliari, Italy. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 94 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: GreenPlaster4Earth.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The fight against climate change has delineated new objectives, among which one of the most crucial is the replacement of high-energy-intensity materials in the construction sector with more sustainable and thermally efficient alternatives to reduce indirect emissions. Consequently, the thermal properties of materials assume fundamental importance. In this regard, the large-scale use of earth represents a promising option, not only due to its widespread availability but especially for its minimal embodied energy. However, to enhance its durability, it is necessary to stabilize the mixtures of raw materials. This study analyzes experimental systems based on earth stabilized with bio-based polymers to evaluate their thermal properties and how these vary depending on the selected mix-design. The experimental measurements showed thermal properties comparable to conventional materials. As expected, thermal conductivity increases when porosity decreases. The minimum value is equal to 0.216 W/m·K vs. a porosity of 43.5%, while the maximum is 0.507 W/m·K vs. a porosity of 33.2%. However, the data obtained for individual systems may vary depending on the topological characteristics, which were analyzed through a model for granular materials. The modeling suggests correlations between microstructures and thermal behaviour, which can be useful to develop tools for the mix-design procedure.

Schlagwörter

Stichwörter der Autor:innen

bio-based polymerearth-based materialseco-friendly materialsmix-designmodelingthermal properties

Autor:innen und Institutionen

  • Dipartimento di Ingegneria Meccanica, Chimica e dei Materiali, Università degli Studi di Cagliari, Via Marengo 2, 09123 Cagliari, Italy.
  • Materialia Association, 09037 San Gavino Monreale, Italy.
  • Dipartimento di Ingegneria Civile, Ambientale e Architettura, Università degli Studi di Cagliari, Via Marengo 2, 09123 Cagliari, Italy.

ORCID-Profile: Marta Cappai, Luca Pilia, Roberto Ricciu, Giorgio Pia

Förderung

  • GreenPlaster4Earth

Zitieren

APA

Cappai, M., Shoukat, R., Pilia, L., Ricciu, R., Lai, D., Marongiu, G., & Pia, G. (2024). Thermal Properties of Eco-Friendly Earthen Materials Stabilized with Bio-Based Polymers: Experimental Data and Modeling Procedure for Improving Mix-Design. Materials, 17(5), 1035. https://doi.org/10.3390/ma17051035

Vancouver

Cappai M, Shoukat R, Pilia L, Ricciu R, Lai D, Marongiu G, et al. Thermal Properties of Eco-Friendly Earthen Materials Stabilized with Bio-Based Polymers: Experimental Data and Modeling Procedure for Improving Mix-Design. Materials. 2024;17(5):1035. doi:10.3390/ma17051035

BibTeX
@article{Cappai2024,
  author = {Cappai, Marta and Shoukat, Rizwan and Pilia, Luca and Ricciu, Roberto and Lai, Daniele and Marongiu, Gianluca and Pia, Giorgio},
  title = {Thermal Properties of Eco-Friendly Earthen Materials Stabilized with Bio-Based Polymers: Experimental Data and Modeling Procedure for Improving Mix-Design},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {5},
  pages = {1035},
  doi = {10.3390/ma17051035}
}
Kostenlos starten →