EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation of the Dynamic Responses of Thin-Walled and Foam-Filled Steel Tubes Subjected to Repeated Impacts

Jing Ge iD, Tingyi Luo, Jun Qiu

Materials · 22.02.2024 · 17 (5) · 1018

DOI: 10.3390/ma17051018 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.02.2024. Verfasst von Jing Ge und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Tongji University, Shanghai 201804, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangsu Province Key R&D Project, the Key Basic Research Project of Shanghai, the List of Key Science and Technology Projects in the Transportation Industry of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a horizontal impact setup was used to measure the dynamic responses of specimens fixed on a reaction wall and subjected to repeated impacts generated by a large-tonnage impactor. The contact force, deformation process, energy absorption, and other properties of two specimens (a thin-walled steel tube and foam-filled steel tube) were thoroughly investigated. The results demonstrated that the thin-walled tube’s properties were consistent with the four-phase and six-phase deformation models and that the foam-filled tube’s properties were consistent with the two-phase deformation model. In the early stages of the experiment, the foam-filled and thin-walled tubes were similar in terms of the contact force and energy absorption. However, when the polyurethane (PU) strain reached 0.8, the PU significantly increased the support of the tubes, reduced the contact force (by extending the contact time), and increased the energy absorption capacity by 33.6–43.5%. The crush curves of the specimens were in agreement for cases involving multiple impacts, as well as for one impact with the same impact of kinetic energy. The crush curves can be used to assess the actual performance of crashworthy devices. Furthermore, after repeated impacts, the foam-filled tube exhibited a pseudo-shakedown behavior.

Schlagwörter

Stichwörter der Autor:innen

PU foamdynamic responsefoam-filled tubehorizontal impact testrepeated impactsthin-walled tube

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Tongji University, Shanghai 201804, China.
  • Jiangsu Hongyuan Science and Technology Engineering Co., Ltd., Changzhou 213161, China.
  • Guangxi Beitou Highway Construction and Investment Group Co., Ltd., Nanning 530028, China.
  • Key Laboratory of Advanced Civil Engineering Materials (Tongji University), Ministry of Education, Shanghai 201804, China.

ORCID-Profile: Jing Ge

Förderung

  • Jiangsu Province Key R&D Project
  • the Key Basic Research Project of Shanghai
  • the List of Key Science and Technology Projects in the Transportation Industry of China
  • Jiangsu Province Key R&D Project

Zitieren

APA

Ge, J., Luo, T., & Qiu, J. (2024). Experimental Investigation of the Dynamic Responses of Thin-Walled and Foam-Filled Steel Tubes Subjected to Repeated Impacts. Materials, 17(5), 1018. https://doi.org/10.3390/ma17051018

Vancouver

Ge J, Luo T, Qiu J. Experimental Investigation of the Dynamic Responses of Thin-Walled and Foam-Filled Steel Tubes Subjected to Repeated Impacts. Materials. 2024;17(5):1018. doi:10.3390/ma17051018

BibTeX
@article{Ge2024,
  author = {Ge, Jing and Luo, Tingyi and Qiu, Jun},
  title = {Experimental Investigation of the Dynamic Responses of Thin-Walled and Foam-Filled Steel Tubes Subjected to Repeated Impacts},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {5},
  pages = {1018},
  doi = {10.3390/ma17051018}
}
Kostenlos starten →