Deformation Behavior and Microstructure of 6061 Aluminum Alloy Processed by Severe Plastic Deformation Using Biaxial Alternate Forging
Materials · 20.02.2024 · 17 (5) · 968
DOI: 10.3390/ma17050968 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 20.02.2024. Verfasst von Seong-Ho Ha und 1 weiteren Autor:innen. Beteiligte Einrichtung: Korea Institute of Industrial Technology, Incheon 21999, Republic of Korea. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, the Ministry of Trade, Industry, and Energy as “Materials & Components Technology Development Program.
Abstract (Originalsprache)
The deformation behavior and microstructure of 6061 aluminum alloy processed by severe plastic deformation (SPD) using biaxial alternate forging that can evaluate the forming limit and mechanical properties of alloys, simultaneously, were investigated in this study. A finite element (FE) analysis on the biaxial alternating forging process, considering the strain-hardening coefficient and forging pass of the material, was conducted. When the strain-hardening coefficient is 0, an average effective strain of 440% was found within a diameter of 4 mm in the core of the workpiece after eight passes, while it was 300% at the same pass number when the strain-hardening coefficient was 0.2. The average effective strain estimated from the FE analysis was about 264% after eight passes of forging, which is considered to be a level of SPD that significantly exceeds the elongation of the raw material. As a result of the tensile test according to the forging pass, after two passes, the strength of the material could be gradually improved without significant degradation of elongation. Even though a large strain of 264% was found after eight passes were applied, deformed grains and twins with no recrystallized structure in optical microstructures with different forging passes were found.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Korea Institute of Industrial Technology, Incheon 21999, Republic of Korea.
ORCID-Profile: Seong-Ho Ha
Förderung
- Ministry of Trade, Industry and Energy
- the Ministry of Trade, Industry, and Energy as “Materials & Components Technology Development Program
Zitieren
APA
Ha, S. H., & Shin, Y. C. (2024). Deformation Behavior and Microstructure of 6061 Aluminum Alloy Processed by Severe Plastic Deformation Using Biaxial Alternate Forging. Materials, 17(5), 968. https://doi.org/10.3390/ma17050968
Vancouver
Ha SH, Shin YC. Deformation Behavior and Microstructure of 6061 Aluminum Alloy Processed by Severe Plastic Deformation Using Biaxial Alternate Forging. Materials. 2024;17(5):968. doi:10.3390/ma17050968
BibTeX
@article{Ha2024,
author = {Ha, Seong-Ho and Shin, Young-Chul},
title = {Deformation Behavior and Microstructure of 6061 Aluminum Alloy Processed by Severe Plastic Deformation Using Biaxial Alternate Forging},
journal = {Materials},
year = {2024},
volume = {17},
number = {5},
pages = {968},
doi = {10.3390/ma17050968}
}
EUVIMED