Predicting Design Solutions with Scenarios Considering the Quality of Materials and Products Based on a Life Cycle Assessment (LCA)
Materials · 19.02.2024 · 17 (4) · 951
DOI: 10.3390/ma17040951 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 19.02.2024. Verfasst von Dominika Siwiec und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, 35-959 Rzeszow, Poland. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The advancement of quality and environmentally sustainable materials and products made from them has improved significantly over the last few years. However, a research gap is the lack of a developed model that allows for the simultaneous analysis of quality and environmental criteria in the life-cycle assessment (LCA) for the selection of materials in newly designed products. Therefore, the objective of the research was to develop a model that supports the prediction of the environmental impact and expected quality of materials and products made from them according to the design solution scenarios considering their LCA. The model implements the GRA method and environmental impact analysis according to the LCA based on ISO 14040. The model test was carried out for light passenger vehicles of BEV with a lithium-ion battery (LiFePO4) and for ICEV. The results indicated a relatively comparable level of quality, but in the case of the environmental impact throughout the life-cycle, the predominant amount of CO2 emissions in the use phase for combustion vehicles. The originality of the developed model to create scenarios of design solutions is created according to which the optimal direction of their development in terms of quality and environment throughout LCA can be predicted.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, 35-959 Rzeszow, Poland.
ORCID-Profile: Dominika Siwiec, Andrzej Pacana
Zitieren
APA
Siwiec, D., & Pacana, A. (2024). Predicting Design Solutions with Scenarios Considering the Quality of Materials and Products Based on a Life Cycle Assessment (LCA). Materials, 17(4), 951. https://doi.org/10.3390/ma17040951
Vancouver
Siwiec D, Pacana A. Predicting Design Solutions with Scenarios Considering the Quality of Materials and Products Based on a Life Cycle Assessment (LCA). Materials. 2024;17(4):951. doi:10.3390/ma17040951
BibTeX
@article{Siwiec2024,
author = {Siwiec, Dominika and Pacana, Andrzej},
title = {Predicting Design Solutions with Scenarios Considering the Quality of Materials and Products Based on a Life Cycle Assessment (LCA)},
journal = {Materials},
year = {2024},
volume = {17},
number = {4},
pages = {951},
doi = {10.3390/ma17040951}
}
EUVIMED