Analysis of Micro-Evolution Mechanism of 3D Crack Initiation in Brittle Materials with Hole under Uniaxial Compression
Materials · 16.02.2024 · 17 (4) · 920
DOI: 10.3390/ma17040920 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 16.02.2024. Verfasst von Semaierjiang Maimaitiyusupu und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Water Conservancy & Hydropower Engineering, Hohai University, Nanjing 210024, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, CRSRI Open Research Program, Fundamental Research Funds for the Central University.
Abstract (Originalsprache)
This article investigates the microscopic mechanism of crack initiation and propagation in three-dimensional embedded cracks in brittle materials containing circular holes. First, a method for the development of transparent, brittle materials is proposed. Second, UCS tests were conducted on transparent, brittle materials containing circular holes and internally embedded three-dimensional cracks. Finally, a numerical model was established in PFC3D to analyze the crack initiation and propagation mechanism. The results show that when α = 0° (α refers to the pre-existing crack inclination), the upper tip of the pre-existing crack appears as a tensile wing crack, and the lower tip of the pre-existing crack appears as a tensile–shear mixed crack. When α = 30°, no wing crack appears, and the tensile crack on the fracture surface only appears after the hole cracks. When α = 60 and 90°, a tensile wing crack and an anti-wing tensile–shear mixed crack appear at the upper tip of the pre-existing crack. A tensile wing crack appears at the lower tip of the pre-existing crack and appears “self-limiting”. During the propagation of wing cracks to the surface of the specimen, the transition sequence of the crack propagation mechanism is tensile through failure—tension-shear mixed failure—tensile failure. It can be seen that the interaction between the crack and hole has an important influence on the evolution mechanism of the crack and the failure mode of the specimen.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Water Conservancy & Hydropower Engineering, Hohai University, Nanjing 210024, China.
- College of Civil Engineering, Kashi University, Kashgar 844006, China.
- Jiangsu Research Center for Geotechnical Engineering Technology, Hohai University, Nanjing 210098, China.
- Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering, Hohai University, Nanjing 210098, China.
ORCID-Profile: Semaierjiang Maimaitiyusupu
Förderung
- National Natural Science Foundation of China
- CRSRI Open Research Program
- Fundamental Research Funds for the Central University
- Major Science and Technology Project of Yunnan Province
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Maimaitiyusupu, S., Zhu, Z., Ren, X., Zhang, H., & Zhu, S. (2024). Analysis of Micro-Evolution Mechanism of 3D Crack Initiation in Brittle Materials with Hole under Uniaxial Compression. Materials, 17(4), 920. https://doi.org/10.3390/ma17040920
Vancouver
Maimaitiyusupu S, Zhu Z, Ren X, Zhang H, Zhu S. Analysis of Micro-Evolution Mechanism of 3D Crack Initiation in Brittle Materials with Hole under Uniaxial Compression. Materials. 2024;17(4):920. doi:10.3390/ma17040920
BibTeX
@article{Maimaitiyusupu2024,
author = {Maimaitiyusupu, Semaierjiang and Zhu, Zhende and Ren, Xuhua and Zhang, Hui and Zhu, Shu},
title = {Analysis of Micro-Evolution Mechanism of 3D Crack Initiation in Brittle Materials with Hole under Uniaxial Compression},
journal = {Materials},
year = {2024},
volume = {17},
number = {4},
pages = {920},
doi = {10.3390/ma17040920}
}
EUVIMED