EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cellulose/Polyhydroxybutyrate (PHB) Composites as a Sustainable Bio-Based Feedstock to 3D-Printing Applications

Lucia D'Arienzo, Stefano Acierno iD, Antonella Patti iD, Luciano Di Maio iD

Materials · 16.02.2024 · 17 (4) · 916

DOI: 10.3390/ma17040916 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.02.2024. Verfasst von Lucia D'Arienzo und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano, Italy. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, we have studied the potential application for 3D-printing of a polymer made from combining a biodegradable and biocompatible polymer (i.e., polyhydroxybutyrate, PHB) with natural bio-based fiber (i.e., cellulose). To this end, a masterbatch at 15 wt.% in filler content was prepared by melt-blending, and then this system was “diluted” with pure PHB in a second extrusion phase in order to produce filaments at 1.5 and 3 wt.% of cellulose. For comparison, a filament made of 100% virgin PHB pellets was prepared under the same conditions. All the systems were then processed in the 3D-printer apparatus, and specimens were mainly characterized by static (tensile and flexural testing) and dynamic mechanical analysis. Thermogravimetric analysis, differential scanning calorimetry, spectroscopic measurements, and morphological aspects of PHB polymer and composites were also discussed. The results showed a significant negative impact of the process on the mechanical properties of the basic PHB with a reduction in both tensile and flexural mechanical properties. The PHB–cellulose composites showed a good dispersion filler in the matrix but a poor interfacial adhesion between the two phases. Furthermore, the cellulose had no effect on the melting behavior and the crystallinity of the polymer. The addition of cellulose improved the thermal stability of the polymer and minimized the negative impact of extrusion. The mechanical performance of the composites was found to be higher compared to the corresponding (processed) polymer.

Schlagwörter

Stichwörter der Autor:innen

3D-printingcellulosemechanical performancepolyhydroxybutyrate (PHB)thermal analysis

Autor:innen und Institutionen

  • Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano, Italy.
  • Department of Engineering, University of Sannio, Piazza Roma 21, 82100 Benevento, Italy.
  • Department of Civil Engineering and Architecture (DICAr), University of Catania, Viale Andrea Doria 6, 95125 Catania, Italy.

ORCID-Profile: Stefano Acierno, Antonella Patti, Luciano Di Maio

Zitieren

APA

D'Arienzo, L., Acierno, S., Patti, A., & Di Maio, L. (2024). Cellulose/Polyhydroxybutyrate (PHB) Composites as a Sustainable Bio-Based Feedstock to 3D-Printing Applications. Materials, 17(4), 916. https://doi.org/10.3390/ma17040916

Vancouver

D'Arienzo L, Acierno S, Patti A, Di Maio L. Cellulose/Polyhydroxybutyrate (PHB) Composites as a Sustainable Bio-Based Feedstock to 3D-Printing Applications. Materials. 2024;17(4):916. doi:10.3390/ma17040916

BibTeX
@article{DArienzo2024,
  author = {D'Arienzo, Lucia and Acierno, Stefano and Patti, Antonella and Di Maio, Luciano},
  title = {Cellulose/Polyhydroxybutyrate (PHB) Composites as a Sustainable Bio-Based Feedstock to 3D-Printing Applications},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {4},
  pages = {916},
  doi = {10.3390/ma17040916}
}
Kostenlos starten →