EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Chemical Activation of Banana Peel Waste-Derived Biochar Using KOH and Urea for CO2 Capture

Joanna Sreńscek-Nazzal iD, Adrianna Kamińska iD, Jarosław Serafin, Beata Michalkiewicz iD

Materials · 14.02.2024 · 17 (4) · 872

DOI: 10.3390/ma17040872 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 14.02.2024. Verfasst von Joanna Sreńscek-Nazzal und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Catalytic and Sorbent Materials Engineering, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology i…. Die Arbeit wurde bisher 58-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article describes the synthesis and characterization of porous carbon derived from waste banana peels by chemical activation with KOH or by activation KOH and urea modification. The as-synthesized samples were carefully characterized by various techniques. The prepared carbonaceous materials possess highly developed micropore and mesopore structures and high specific surface area (up to 2795 cm2/g for materials synthetized with KOH and 2718 cm2/g for activated carbons prepared with KOH and urea). A series of KOH-activated samples showed CO2 adsorption at 1 bar to 5.75 mmol/g at 0 °C and 3.74 mmol/g at 25 °C. The incorporation of nitrogen into the carbon sorbent structure increased the carbon uptake capacity of the resulting materials at 1 bar to 6.28 mmol/g and to 3.86 mmol/g at 0 °C and 25 °C, respectively. It was demonstrated that treatment with urea leads to a significant increase in nitrogen content and, consequently, CO2 adsorption, except for the material carbonized at 900 °C. At such a high temperature, almost complete decomposition of urea occurs. The results presented in this work could be used in the future for utilization of biomass such as banana peels as a low-cost adsorbent for CO2 capture, which could have a positive impact on the environment and human health protection.

Schlagwörter

Stichwörter der Autor:innen

CO2 adsorptionactivated carbonbanana peelsurea

Autor:innen und Institutionen

  • Department of Catalytic and Sorbent Materials Engineering, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology in Szczecin, Piastów Ave. 42, 71-065 Szczecin, Poland.
  • Department of Inorganic and Organic Chemistry, University of Barcelona, Martí i Franquès, 1-11, 08028 Barcelona, Spain.

ORCID-Profile: Joanna Sreńscek-Nazzal, Adrianna Kamińska, Beata Michalkiewicz

Zitieren

APA

Sreńscek-Nazzal, J., Kamińska, A., Serafin, J., & Michalkiewicz, B. (2024). Chemical Activation of Banana Peel Waste-Derived Biochar Using KOH and Urea for CO2 Capture. Materials, 17(4), 872. https://doi.org/10.3390/ma17040872

Vancouver

Sreńscek-Nazzal J, Kamińska A, Serafin J, Michalkiewicz B. Chemical Activation of Banana Peel Waste-Derived Biochar Using KOH and Urea for CO2 Capture. Materials. 2024;17(4):872. doi:10.3390/ma17040872

BibTeX
@article{SrescekNazzal2024,
  author = {Sreńscek-Nazzal, Joanna and Kamińska, Adrianna and Serafin, Jarosław and Michalkiewicz, Beata},
  title = {Chemical Activation of Banana Peel Waste-Derived Biochar Using KOH and Urea for CO2 Capture},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {4},
  pages = {872},
  doi = {10.3390/ma17040872}
}
Kostenlos starten →