Exploring the Impact of Different Milling Parameters of Fe/SiO2 Composites on Their Structural and Magnetic Properties
Materials · 12.02.2024 · 17 (4) · 862
DOI: 10.3390/ma17040862 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 12.02.2024. Verfasst von Tetiana Rudeichuk und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Manufacturing Management, Faculty of Manufacturing Technologies, Technical University of Košice, Bayerova 1, 08001 Prešov, Slovakia. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific Grant Agency of Ministry of Education of Slovak Republic and Slovak Academy of Science, Slovak Research and Development Agency, Scientific Grant Agency of the Ministry of Education of Slovak Republic and the Slovak Academy of Science.
Abstract (Originalsprache)
This research focuses on the production process of soft magnetic composites in the form of 3D bulk compacts made from insulated powder particles using different milling parameters, aiming to enhance their magnetic properties and to study an innovative method of the powder surface “smoothing” technique. A structure analysis using scanning electron microscopy (SEM), EDS, and optical microscopy is also included. We found out that the samples made by the innovative method have lower density values. This can be caused by a more consistent SiO2 insulation layer on highly pure iron powder particles. A correlation between the mechanical smoothing method and better insulation of powder particles can help to provide eco-friendlier solutions for the preparation of soft magnetic composites, such as less usage of reagents and more consistent coverage of powder particles with lower final insulation thickness. The magnetic properties of these compacts are evaluated by coercive field, permeability, and loss measurements. The particle-level smoothing technique in some cases can reduce the value of coercivity up to 20%. For some samples, the ball-to-powder ratio has a bigger impact on magnetic properties than surface treatment, which can be caused by an increased amount of insulation in the SMC compacts.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Manufacturing Management, Faculty of Manufacturing Technologies, Technical University of Košice, Bayerova 1, 08001 Prešov, Slovakia.
- Institute of Physics, Faculty of Science, Pavol Jozef Šafárik University in Košice, Park Angelinum 9, 04154 Košice, Slovakia.
- Institute of Materials Technology, Faculty of Mechanical Engineering, Poznan University of Technology, Piotrowo 3, 60-965 Poznan, Poland.
ORCID-Profile: Tetiana Rudeichuk, Denisa Olekšáková, Waldemar Matysiak
Förderung
- Scientific Grant Agency of Ministry of Education of Slovak Republic and Slovak Academy of Science
- Slovak Research and Development Agency
- Scientific Grant Agency of the Ministry of Education of Slovak Republic and the Slovak Academy of Science
Zitieren
APA
Rudeichuk, T., Olekšáková, D., Maciaszek, R., Matysiak, W., & Kollár, P. (2024). Exploring the Impact of Different Milling Parameters of Fe/SiO2 Composites on Their Structural and Magnetic Properties. Materials, 17(4), 862. https://doi.org/10.3390/ma17040862
Vancouver
Rudeichuk T, Olekšáková D, Maciaszek R, Matysiak W, Kollár P. Exploring the Impact of Different Milling Parameters of Fe/SiO2 Composites on Their Structural and Magnetic Properties. Materials. 2024;17(4):862. doi:10.3390/ma17040862
BibTeX
@article{Rudeichuk2024,
author = {Rudeichuk, Tetiana and Olekšáková, Denisa and Maciaszek, Robert and Matysiak, Waldemar and Kollár, Peter},
title = {Exploring the Impact of Different Milling Parameters of Fe/SiO2 Composites on Their Structural and Magnetic Properties},
journal = {Materials},
year = {2024},
volume = {17},
number = {4},
pages = {862},
doi = {10.3390/ma17040862}
}
EUVIMED