EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

NASICON Membrane with High Ionic Conductivity Synthesized by High-Temperature Solid-State Reaction

Mihaela Iordache iD, Anisoara Oubraham, Irina Petreanu iD, Claudia Sisu, Simona Borta, Catalin Capris, Amalia Soare, Adriana Marinoiu iD

Materials · 08.02.2024 · 17 (4) · 823

DOI: 10.3390/ma17040823 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.02.2024. Verfasst von Mihaela Iordache und 7 weiteren Autor:innen. Beteiligte Einrichtung: National R&D Institute for Cryogenics and Isotopic Technologies-ICSI Ramnicu Valcea, Uzinei No. 4, 240050 Vâlcea, Romania. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerul Cercetării și Inovării, Ministry of Research, Innovation, and Digitization of Romania.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present work, we studied the impact of excess Na addition on the structure of the standard NASICON ion conductor along with Na ion transport mechanisms. In this sense, NASICON ceramic membranes (NZSP) were prepared by a simple chemical synthesis method, the solid state reaction (SSR), using an excess of 5% Na (Na3.15Zr2Si2PO12) and an excess of 10% Na (Na3.3Zr2Si2PO12), in order to improve the conduction properties of the ceramic membrane. The characterization of the NZSP nanoparticles was performed by measuring the particle size by dynamic light scattering (DLS), the morphology of the NASICON samples pre-sintered at 1100 °C was analyzed by the SEM method (scanning electron microscope), and X-ray diffraction (XRD) analysis was used to investigate the crystal structure of samples, while the surface area was measured using the BET technique. The electrical properties (i.e., ionic conductivity) were evaluated by impedance spectroscopic methods at room temperature (RT). Following the experiments for NASICON membranes without Na excess, with 5% Na excess, and with 10% Na excess synthesized at different pressing forces and sintering temperatures, it was found that membranes with a 10% Na excess, sintered at 1175 °C for 10 h, presented a good ionic conductivity (4.72 × 10−4 S/cm).

Schlagwörter

Stichwörter der Autor:innen

NASICON ceramic membranesionic conductivitiessolid state reaction

Autor:innen und Institutionen

  • National R&D Institute for Cryogenics and Isotopic Technologies-ICSI Ramnicu Valcea, Uzinei No. 4, 240050 Vâlcea, Romania.

ORCID-Profile: Mihaela Iordache, Irina Petreanu, Adriana Marinoiu

Förderung

  • Ministerul Cercetării și Inovării
  • Ministry of Research, Innovation, and Digitization of Romania

Zitieren

APA

Iordache, M., Oubraham, A., Petreanu, I., Sisu, C., Borta, S., Capris, C., Soare, A., & Marinoiu, A. (2024). NASICON Membrane with High Ionic Conductivity Synthesized by High-Temperature Solid-State Reaction. Materials, 17(4), 823. https://doi.org/10.3390/ma17040823

Vancouver

Iordache M, Oubraham A, Petreanu I, Sisu C, Borta S, Capris C, et al. NASICON Membrane with High Ionic Conductivity Synthesized by High-Temperature Solid-State Reaction. Materials. 2024;17(4):823. doi:10.3390/ma17040823

BibTeX
@article{Iordache2024,
  author = {Iordache, Mihaela and Oubraham, Anisoara and Petreanu, Irina and Sisu, Claudia and Borta, Simona and Capris, Catalin and Soare, Amalia and Marinoiu, Adriana},
  title = {NASICON Membrane with High Ionic Conductivity Synthesized by High-Temperature Solid-State Reaction},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {4},
  pages = {823},
  doi = {10.3390/ma17040823}
}
Kostenlos starten →