EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of a Recycling Process and Characterization of EVA, PVDF, and PET Polymers from End-of-Life PV Modules

Marek Królikowski iD, Michał Fotek, Piotr Żach iD, Marcin Michałowski iD

Materials · 08.02.2024 · 17 (4) · 821

DOI: 10.3390/ma17040821 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.02.2024. Verfasst von Marek Królikowski und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw, Poland. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Warsaw University of Technology, Faculty of Automotive and Construction Machinery Engineering at the Warsaw University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Photovoltaic (PV) modules are highly efficient power generators associated with solar energy. The rapid growth of the PV industry will lead to a sharp increase in the waste generated from PV panels. However, electro-waste can be successfully used as a source of secondary materials. In this study, a unique procedure for recycling PV modules was developed. In the first stage, the aluminum frame and junction box, 18wt%. and 1wt%. of the module, respectively, were removed. The following stage was crucial, involving a mechanical–thermal method to remove the glass, which accounts for 70wt%. As a result, only 11wt%. of the initial mass of the PV was subjected to the next stage of chemical delamination, which reduced the amount of solvent used. Toluene was used to swell the ethylene vinyl acetate, EVA, and allow for the separation of the PV module. The effects of temperature and ultrasound on separation time were investigated. After the separation of silicon cells, metal ribbons, EVA, and the backsheet were obtained. The purity of the polymers was determined by FTIR and elemental analysis. Thermal properties were measured using DSC calorimetry to determine the basic parameters of the material.

Schlagwörter

Stichwörter der Autor:innen

EVAFTIR spectroscopyPETPVDFchemical treatmentelemental analysismechanical–thermal treatmentphotovoltaic modulerecycling PV module

Autor:innen und Institutionen

  • Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw, Poland.
  • Faculty of Automotive and Construction Machinery, Warsaw University of Technology, Narbutta 84, 02-524 Warsaw, Poland.
  • Faculty of Mechatronics, Warsaw University of Technology, św. Andrzeja Boboli 8, 02-525 Warsaw, Poland.

ORCID-Profile: Marek Królikowski, Piotr Żach, Marcin Michałowski

Förderung

  • Warsaw University of Technology
  • Faculty of Automotive and Construction Machinery Engineering at the Warsaw University of Technology

Zitieren

APA

Królikowski, M., Fotek, M., Żach, P., & Michałowski, M. (2024). Development of a Recycling Process and Characterization of EVA, PVDF, and PET Polymers from End-of-Life PV Modules. Materials, 17(4), 821. https://doi.org/10.3390/ma17040821

Vancouver

Królikowski M, Fotek M, Żach P, Michałowski M. Development of a Recycling Process and Characterization of EVA, PVDF, and PET Polymers from End-of-Life PV Modules. Materials. 2024;17(4):821. doi:10.3390/ma17040821

BibTeX
@article{Krlikowski2024,
  author = {Królikowski, Marek and Fotek, Michał and Żach, Piotr and Michałowski, Marcin},
  title = {Development of a Recycling Process and Characterization of EVA, PVDF, and PET Polymers from End-of-Life PV Modules},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {4},
  pages = {821},
  doi = {10.3390/ma17040821}
}
Kostenlos starten →