EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanics of Pure Bending and Eccentric Buckling in High-Strain Composite Structures

Jimesh D Bhagatji iD, Oleksandr G Kravchenko iD, Sharanabasaweshwara Asundi iD

Materials · 07.02.2024 · 17 (4) · 796

DOI: 10.3390/ma17040796 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.02.2024. Verfasst von Jimesh D Bhagatji und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Aerospace Engineering, Old Dominion University, Norfolk, VA 23529, USA. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Virginia Space Grant Consortium (VSGC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To maximize the capabilities of nano- and micro-class satellites, which are limited by their size, weight, and power, advancements in deployable mechanisms with a high deployable surface area to packaging volume ratio are necessary. Without progress in understanding the mechanics of high-strain materials and structures, the development of compact deployable mechanisms for this class of satellites would be difficult. This paper presents fabrication, experimental testing, and progressive failure modeling to study the deformation of an ultra-thin composite beam. The research study examines the deformation modes of a post-deployed boom under repetitive pure bending loads using a four-point bending setup and bending collapse failure under eccentric buckling. The material and fabrication challenges for ultra-thin, high-stiffness (UTHS) composite boom are discussed in detail. The continuum damage mechanics (CDM) model for the beam is calibrated using experimental coupon testing and was used for a finite element explicit analysis of the boom. It is shown that UTHS can sustain a bending radius of 14 mm without significant fiber and matrix damage. The finite element model accurately predicts the localized transverse fiber damage under eccentric buckling and buckling stiffness of 15.6 N/mm. The results of the bending simulation were found to closely match the experimental results, indicating that the simulation accurately shows deformation stages and predicts damage to the material. The findings of this research provide a better understanding of the structure characteristics with the progressive damage model of the UTHS boom, which can be used for designing a complex deployable payload for nano-micro-class satellites.

Schlagwörter

Stichwörter der Autor:innen

bending characterizationbucklingcomposite boomcontinuum damage mechanics

Autor:innen und Institutionen

  • Department of Mechanical and Aerospace Engineering, Old Dominion University, Norfolk, VA 23529, USA.

ORCID-Profile: Jimesh D Bhagatji, Oleksandr G Kravchenko, Sharanabasaweshwara Asundi

Förderung

  • Virginia Space Grant Consortium (VSGC)

Zitieren

APA

Bhagatji, J. D., Kravchenko, O. G., & Asundi, S. (2024). Mechanics of Pure Bending and Eccentric Buckling in High-Strain Composite Structures. Materials, 17(4), 796. https://doi.org/10.3390/ma17040796

Vancouver

Bhagatji JD, Kravchenko OG, Asundi S. Mechanics of Pure Bending and Eccentric Buckling in High-Strain Composite Structures. Materials. 2024;17(4):796. doi:10.3390/ma17040796

BibTeX
@article{Bhagatji2024,
  author = {Bhagatji, Jimesh D and Kravchenko, Oleksandr G and Asundi, Sharanabasaweshwara},
  title = {Mechanics of Pure Bending and Eccentric Buckling in High-Strain Composite Structures},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {4},
  pages = {796},
  doi = {10.3390/ma17040796}
}
Kostenlos starten →