Powder Bed Fusion 3D Printing in Precision Manufacturing for Biomedical Applications: A Comprehensive Review
Materials · 05.02.2024 · 17 (3) · 769
DOI: 10.3390/ma17030769 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 05.02.2024. Verfasst von Rajan John Nekin Joshua und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Manufacturing Engineering, School of Mechanical Engineering, Vellore Institute of Technology, Vellore 632014, Tamil Nadu, India. Die Arbeit wurde bisher 91-mal zitiert (Crossref) und nennt 247 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universiti Putra Malaysia, Ministry of Science and Higher Education, Ministry of Education and Science.
Abstract (Originalsprache)
Precision manufacturing requirements are the key to ensuring the quality and reliability of biomedical implants. The powder bed fusion (PBF) technique offers a promising solution, enabling the creation of complex, patient-specific implants with a high degree of precision. This technology is revolutionizing the biomedical industry, paving the way for a new era of personalized medicine. This review explores and details powder bed fusion 3D printing and its application in the biomedical field. It begins with an introduction to the powder bed fusion 3D-printing technology and its various classifications. Later, it analyzes the numerous fields in which powder bed fusion 3D printing has been successfully deployed where precision components are required, including the fabrication of personalized implants and scaffolds for tissue engineering. This review also discusses the potential advantages and limitations for using the powder bed fusion 3D-printing technology in terms of precision, customization, and cost effectiveness. In addition, it highlights the current challenges and prospects of the powder bed fusion 3D-printing technology. This work offers valuable insights for researchers engaged in the field, aiming to contribute to the advancement of the powder bed fusion 3D-printing technology in the context of precision manufacturing for biomedical applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Manufacturing Engineering, School of Mechanical Engineering, Vellore Institute of Technology, Vellore 632014, Tamil Nadu, India.
- Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.
- Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.
- Aerospace Malaysia Innovation Centre (944751-A), Prime Minister's Department, MIGHT Partnership Hub, Jalan Impact, Cyberjaya 63000, Selangor, Malaysia.
- Institute of Mechanical Engineering, Faculty of Mechanical Engineering, Bialystok University of Technology, Wiejska 45C, 15-351 Bialystok, Poland.
- Department of Production Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland.
ORCID-Profile: Rajan John Nekin Joshua, Sakthivel Aravind Raj, Mohamed Thariq Hameed Sultan, Andrzej Łukaszewicz, Jerzy Józwik, Zbigniew Oksiuta, Krzysztof Dziedzic, Farah Syazwani Shahar
Förderung
- Universiti Putra Malaysia
- Ministry of Science and Higher Education
- Ministry of Education and Science
- Ministry of Science and Higher Education of Poland with allocation to the Faculty of Mechanical Engineering, Bialystok University of Technology
Zitieren
APA
Joshua, R. J. N., Raj, S. A., Hameed Sultan, M. T., Łukaszewicz, A., Józwik, J., Oksiuta, Z., Dziedzic, K., Tofil, A., & Shahar, F. S. (2024). Powder Bed Fusion 3D Printing in Precision Manufacturing for Biomedical Applications: A Comprehensive Review. Materials, 17(3), 769. https://doi.org/10.3390/ma17030769
Vancouver
Joshua RJN, Raj SA, Hameed Sultan MT, Łukaszewicz A, Józwik J, Oksiuta Z, et al. Powder Bed Fusion 3D Printing in Precision Manufacturing for Biomedical Applications: A Comprehensive Review. Materials. 2024;17(3):769. doi:10.3390/ma17030769
BibTeX
@article{Joshua2024,
author = {Joshua, Rajan John Nekin and Raj, Sakthivel Aravind and Hameed Sultan, Mohamed Thariq and Łukaszewicz, Andrzej and Józwik, Jerzy and Oksiuta, Zbigniew and Dziedzic, Krzysztof and Tofil, Arkadiusz and Shahar, Farah Syazwani},
title = {Powder Bed Fusion 3D Printing in Precision Manufacturing for Biomedical Applications: A Comprehensive Review},
journal = {Materials},
year = {2024},
volume = {17},
number = {3},
pages = {769},
doi = {10.3390/ma17030769}
}
EUVIMED