EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dynamic Mechanical Properties and Modified Johnson-Cook Model Considering Recrystallization Softening for Nickel-Based Powder Metallurgy Superalloys

Chen Ling, Xiaoping Ren, Xuepeng Wang, Yinghao Li, Zhanqiang Liu iD, Bing Wang, Jinfu Zhao

Materials · 30.01.2024 · 17 (3) · 670

DOI: 10.3390/ma17030670 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.01.2024. Verfasst von Chen Ling und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Shandong University, Jinan 250061, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation, Shandong Provincial Key Research and Development Program (Major Scientific and Technological Innovation Project).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The material undergoes high temperature and high strain rate deformation process during the cutting process, which may induce the dynamic recrystallization behavior and result in the evolution of dynamic mechanical properties of the material to be machined. In this paper, the modified Johnson-Cook (J-C) model for nickel-based powder metallurgy superalloy considering dynamic recrystallization behavior in high strain rate and temperature is proposed. The dynamic mechanical properties of the material under different strain rates and temperature conditions are obtained by quasi-static compression test and split Hopkinson pressure bar (SHPB) test. The coefficients of the modified J-C model are obtained by the linear regression method. The modified model is verified by comparison with experimental and model prediction results. The results show that the modified J-C model proposed in this paper can accurately describe the mechanical properties of nickel-based powder metallurgy superalloys at high temperatures and high strain rates. This provides help for studying the cutting mechanism and finite element simulation of nickel-based powder metallurgy superalloy.

Schlagwörter

Stichwörter der Autor:innen

constitutive modeldynamic mechanical propertiesdynamic recrystallizationpowder metallurgy superalloy

Autor:innen und Institutionen

  • School of Mechanical Engineering, Shandong University, Jinan 250061, China.
  • Key National Demonstration Center for Experimental Mechanical Engineering Education, Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MQE, Jinan 250014, China.

ORCID-Profile: Zhanqiang Liu

Förderung

  • National Natural Science Foundation of China
  • China Postdoctoral Science Foundation
  • Shandong Provincial Key Research and Development Program (Major Scientific and Technological Innovation Project)
  • Natural Science Foundation of Shandong Province
  • Key Laboratory of High-efficiency and Clean Mechanical Manufacture at Shandong University and Taishan Scholar Foundation

Zitieren

APA

Ling, C., Ren, X., Wang, X., Li, Y., Liu, Z., Wang, B., & Zhao, J. (2024). Dynamic Mechanical Properties and Modified Johnson-Cook Model Considering Recrystallization Softening for Nickel-Based Powder Metallurgy Superalloys. Materials, 17(3), 670. https://doi.org/10.3390/ma17030670

Vancouver

Ling C, Ren X, Wang X, Li Y, Liu Z, Wang B, et al. Dynamic Mechanical Properties and Modified Johnson-Cook Model Considering Recrystallization Softening for Nickel-Based Powder Metallurgy Superalloys. Materials. 2024;17(3):670. doi:10.3390/ma17030670

BibTeX
@article{Ling2024,
  author = {Ling, Chen and Ren, Xiaoping and Wang, Xuepeng and Li, Yinghao and Liu, Zhanqiang and Wang, Bing and Zhao, Jinfu},
  title = {Dynamic Mechanical Properties and Modified Johnson-Cook Model Considering Recrystallization Softening for Nickel-Based Powder Metallurgy Superalloys},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {3},
  pages = {670},
  doi = {10.3390/ma17030670}
}
Kostenlos starten →