EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Mineral Powders on the Properties of Foam Concrete Prepared by Cationic and Anionic Surfactants as Foaming Agents

Qi Liu, Huanghua Chen, Shiyu Fang, Jin Luo

Materials · 26.01.2024 · 17 (3) · 606

DOI: 10.3390/ma17030606 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.01.2024. Verfasst von Qi Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Featured Metal Materials and Life-Cycle Safety for Composite Structures, School of Civil Engineering and Architecture, Guangx…. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Provincial funding.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Foam concrete is a type of cement mortar in which air bubbles are introduced using an appropriate foaming agent. The complex conditions for the preparation of solid particle stabilized foams limit their wide application in construction. In this study, a method of adding small amounts of calcite (Cal) and muscovite (Mus) to the cement paste matrix is proposed to improve the properties of foam concrete prepared with cationic and anionic surfactants as foaming agents. The effects of mineral powders on the flowability, compressive strength, water absorption, pore characteristics, thermal conductivity and frost resistance of foam concrete were investigated and the enhancement mechanism was revealed by the results of XRD, low-field nuclear magnetic resonance (LF-NMR), Fourier transform infrared spectroscopy (FTIR) and SEM. The results showed that the mineral powders interacted with anionic and cationic surfactants through physical adsorption. Whether anionic or cationic surfactants were used as foaming agents, the addition of mineral powders promoted the formation of shell-like structures around the foam, thus enhancing the performance of foam concrete. As a result, the fluidity, compressive strength and frost resistance of the foam concrete increased, the water absorption and thermal conductivity decreased, and the average size of the pores decreased.

Schlagwörter

Stichwörter der Autor:innen

FTIRfoam concretemineral powderspore characteristicsthermal conductivity

Autor:innen und Institutionen

  • State Key Laboratory of Featured Metal Materials and Life-Cycle Safety for Composite Structures, School of Civil Engineering and Architecture, Guangxi University, Nanning 530004, China.

Förderung

  • National Natural Science Foundation of China
  • Provincial funding

Zitieren

APA

Liu, Q., Chen, H., Fang, S., & Luo, J. (2024). Effect of Mineral Powders on the Properties of Foam Concrete Prepared by Cationic and Anionic Surfactants as Foaming Agents. Materials, 17(3), 606. https://doi.org/10.3390/ma17030606

Vancouver

Liu Q, Chen H, Fang S, Luo J. Effect of Mineral Powders on the Properties of Foam Concrete Prepared by Cationic and Anionic Surfactants as Foaming Agents. Materials. 2024;17(3):606. doi:10.3390/ma17030606

BibTeX
@article{Liu2024,
  author = {Liu, Qi and Chen, Huanghua and Fang, Shiyu and Luo, Jin},
  title = {Effect of Mineral Powders on the Properties of Foam Concrete Prepared by Cationic and Anionic Surfactants as Foaming Agents},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {3},
  pages = {606},
  doi = {10.3390/ma17030606}
}
Kostenlos starten →