EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Aging Treatment on the Microstructures and Mechanical Properties of a TC18 Alloy

Song Zhang, Yong-Cheng Lin iD, Li-Hua Wang, Hong-Bo Ding, Yu-Liang Qiu

Materials · 25.01.2024 · 17 (3) · 570

DOI: 10.3390/ma17030570 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.01.2024. Verfasst von Song Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Light Alloy Research Institute, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Fundamental Research Funds for the Central Universities of Central South University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present work, the effects of aging treatment on the microstructures of a TC18 alloy are studied. The influence of aging treatment on the tensile properties and failure mechanisms is systematically analyzed. It is found that the size and morphology of the primary α (αp) phases are insensitive to aging temperature and time. Furthermore, the aging temperature and time dramatically influence the precipitation of the secondary α (αs) phases. Massive αs phases precipitate and gradually coarsen, and finally weave together by increasing the aging temperature or extending the aging time. The variations in αp and αs phases induced by aging parameters also affect the mechanical properties. Both yield strength (YS) and ultimate tensile strength (UTS) first increase and then decrease by increasing the aging temperature and time, while ductility first decreases and then increases. There is an excellent balance between the strengths and ductility. When the aging temperature is changed from 450 to 550 °C, YS varies from 1238.6 to 1381.6 MPa, UTS varies from 1363.2 to 1516.8 MPa, and the moderate elongation ranges from 9.0% to 10.3%. These results reveal that the thickness of αs phases is responsible for material strengths, while the content of α phases can enhance material ductility. The ductile characteristics of the alloy with coarser αs phases are more obvious than those with thinner αs phases. Therefore, the aging treatment is helpful for the precipitation and homogeneous distribution of αs phases, which are essential for balancing the strengths and ductility of the studied Ti alloy.

Schlagwörter

Stichwörter der Autor:innen

TC18 alloyaging treatmentfracture mechanismsmechanical propertiesmicrostructures

Autor:innen und Institutionen

  • Light Alloy Research Institute, Central South University, Changsha 410083, China.
  • School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China.
  • State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Changsha 410083, China.
  • China Nonferrous Metals Processing Technology Co., Ltd., Luoyang 471039, China.
  • Rongcheng Huadong Metal-Forming Machinery Co., Ltd., Rongcheng 264300, China.

ORCID-Profile: Yong-Cheng Lin

Förderung

  • National Key Research and Development Program of China
  • Fundamental Research Funds for the Central Universities of Central South University

Zitieren

APA

Zhang, S., Lin, Y. C., Wang, L. H., Ding, H. B., & Qiu, Y. L. (2024). Effects of Aging Treatment on the Microstructures and Mechanical Properties of a TC18 Alloy. Materials, 17(3), 570. https://doi.org/10.3390/ma17030570

Vancouver

Zhang S, Lin YC, Wang LH, Ding HB, Qiu YL. Effects of Aging Treatment on the Microstructures and Mechanical Properties of a TC18 Alloy. Materials. 2024;17(3):570. doi:10.3390/ma17030570

BibTeX
@article{Zhang2024,
  author = {Zhang, Song and Lin, Yong-Cheng and Wang, Li-Hua and Ding, Hong-Bo and Qiu, Yu-Liang},
  title = {Effects of Aging Treatment on the Microstructures and Mechanical Properties of a TC18 Alloy},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {3},
  pages = {570},
  doi = {10.3390/ma17030570}
}
Kostenlos starten →